6 posts
Page 1 of 1
All,

This was explained to me previously but I didn't quite understand, perhaps you all can clarify?

I have 3 x external reverb/multi-effects that are in a rack format,
and 3 x Strymon Pedals effects (Delay, Reverb & Phaser)

Can these all be connected to my mixer at once?
Looking at the back of the mixer there are 2 pairs of Aux/Inputs so in theory does it mean only 2 external effect units can be added?

I very much enjoy these and other hardware effect units and think I might be limited.
How have you setup your effects?
User avatar
by wahlerstudios on Fri May 17, 2019 7:36 am
If you want to address each effect unit separate, you will need 6 aux sends and their physical outputs. This could be flex mixes 1 to 6, set to post fade. Each flex mix has its own parametric equalizer, which can help to "shape" the sound even more.

Effect sends are always mono, but effect returns are stereo. If you don't need the input 13 to 24 channels otherwise, simply connect your returns there. These input channels have combo sockets (balanced mic/line channel inputs), so you don't need the two Aux In's for external effects.

Welcome to the Forum!

;)

SL16 | 32R | 16M

Apple routers | iPads | PreSonus SW5E & Motu AVB switches | Alesis iO Dock with AudioTools' Smaart RTA & Spectograph extension |
Yamaha S112, S15e, S10e, SM12, SM10 | Galaxy Audio Hot Spots | Mac mini | Lenovo Laptop | Studio One Pro 3.5.6
User avatar
by shazibmalik on Fri May 17, 2019 5:27 pm
Thank you for your advice it was very helpful to know that I can connect more external effects.

wahlerstudios wroteEffect sends are always mono, but effect returns are stereo. If you don't need the input 13 to 24 channels otherwise, simply connect your returns there. These input channels have combo sockets (balanced mic/line channel inputs), so you don't need the two Aux In's for external effects.

Welcome to the Forum!

;)


I have electronic music gear connected to the mixer so inputs 13 to 24 have already been used up by synths and drum machines.

What I’m going to do is purchase leads and move half a dozen of them up to the Mic xlr port 1 onwards.
This will make input channels 13 onwards available.

Please see the attached layout, this is what I understand about the connectivity. Is this correct?

9F43EDE7-F85E-471E-8E35-92EAF309572A.png
Last edited by shazibmalik on Fri May 17, 2019 5:49 pm, edited 1 time in total.
User avatar
by wahlerstudios on Fri May 17, 2019 5:43 pm
Yes, that would be correct connections. I don't know how the Alesis handles the stereo sends. Maybe it's woth to use two flex mixes / auxes of the console. Take what sounds best.

SL16 | 32R | 16M

Apple routers | iPads | PreSonus SW5E & Motu AVB switches | Alesis iO Dock with AudioTools' Smaart RTA & Spectograph extension |
Yamaha S112, S15e, S10e, SM12, SM10 | Galaxy Audio Hot Spots | Mac mini | Lenovo Laptop | Studio One Pro 3.5.6
User avatar
by shazibmalik on Sun May 19, 2019 10:10 am
wahlerstudios wroteYes, that would be correct connections. I don't know how the Alesis handles the stereo sends. Maybe it's woth to use two flex mixes / auxes of the console. Take what sounds best.



B224D019-4999-418A-BD44-AAB73C41EF41.jpeg



Is there any disadvantage to using the Aux Inputs?

The problem is that I have almost used all my Mic/Line inputs with instruments. I’d have to buy new XLR leads to move them up to Mic 1 onwards?
User avatar
by wahlerstudios on Sun May 19, 2019 10:51 am
No, of course there is no reason to not use the Aux Ins. They are the "normal" inputs for external effects, but there are only two stereo returns. If I understood your question right, you wanted to have more returns than two and possibly also more sends.

It's also possible to use Tape In left/right as return for external effects.

BTW - I see on your photo that the volume knob of the Main Outputs is set to Zero. If you want to hear something, the knob should be turned up fully (or to the level you need).

SL16 | 32R | 16M

Apple routers | iPads | PreSonus SW5E & Motu AVB switches | Alesis iO Dock with AudioTools' Smaart RTA & Spectograph extension |
Yamaha S112, S15e, S10e, SM12, SM10 | Galaxy Audio Hot Spots | Mac mini | Lenovo Laptop | Studio One Pro 3.5.6

6 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 2 guests