I was planning on eventually setting up Ethernet cables around the house so I can use other rooms for recording and then get one NSB unit that I can move around. But I was not sure if I would need to shut everything down to unplug - move to another room - then plug back in.
I guess the safest process might be to: save the scene in the StudioLive, unlink the NSB from the board using the Stagebox screen in the Audio Routing area, move the NSB, relink the NSB, then finally reload the scene.
Do the NSB units need to be powered down before you connect/disconnect the AVB connections or are they "hot swappable?"
I'd recommend powering the NSB down before moving to another room in your house. In my testing everything worked fine providing each location was on the same router/switch.
Search the STUDIO ONE 4 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.
Windows 10 Pro 64-bit (1909), Studio One 4.6.1 Pro | Notion 6.5 | Universal Control v.126.96.36.199558
Dell Inspiron 17 5770 (Intel Core i7-8550U 1.8 GHz, 4GB AMD Radeon 530 Graphics, 16GB RAM, Samsung 860 EVO 2TB SSD
StudioLive Series III 32 V188.8.131.5241
Users browsing this forum: No registered users and 0 guests