4 posts
Page 1 of 1
As a new user (about 4 months) of S14 and SL32, I recently upgraded the SL32 to 1.10.15552 (44.1kHz upgrade) and S14 to 4.1.3.50787.

I've noticed that when I open an old S14 song, funny things happen to the transport (the play and stop illuminate together and nothing then happens), the select, solo and mute buttons work on the console but don't actually do anything to the software on screen.

Am I supposed to convert an old song to work with the new setup?

Window 10, HP Z800 PC, Dual Intel Xeon X5560@2.80GHz (2 processors), 64Gb RAM, 2 x SSD, 2 x HD, Native Instruments ULTIMATE KOMPLETE 11 plus Symphonic Series Library, Nektar Panorama P6, Komplete Kontrol S25, Studio One 4 (pro), Cubase 9.5 PRO, Dorico 2, Notion 5, Studiolive Series 3 32, various outboard.
User avatar
by wahlerstudios on Mon Feb 04, 2019 5:55 am
The firmware upgrade for the Series III mixers has also introduced two more DAW modes and by default none of the three DAW modes is selected. You have to "tell" your SL, which DAW mode you want to work in. Once selected, the mixer remembers this setting. Press the UCNET button and scroll down to Studio One. Maybe things will work again then... ;-)

Under "Transport Controls" you need to select "Software Control".

SL16 | 32R | 16M

Apple routers | iPads | PreSonus SW5E & Motu AVB switches | Alesis iO Dock with AudioTools' Smaart RTA & Spectograph extension |
Yamaha S112, S15e, S10e, SM12, SM10 | Galaxy Audio Hot Spots | Mac mini | Lenovo Laptop | Studio One Pro 3.5.6
User avatar
by roblof on Mon Feb 04, 2019 8:11 am
If your selected audio device isn’t connected or in error of some sort then the transport controls in s1 will behave like that.

Select a different audio device and re-select the one you intend to use to see if things clears up.

iMac late 2015, Behringer X-Touch, X-Touch ONE, M-Air mr18, X-Air xr18, x32 with Dante/aes67, x32-rack with Dante/aes67, s16 and sd16 stageboxes, p16 monitor system, TurboSound iQ-speakers, Waves x-wsg with SoundGrid server, Motör 61, BCR-2000, StudioLive 24, FirePod 10, Apogee Ensemble, Alesis HD24, Studio One Pro v4.1.1, Notion 6, NI Komplete 11 Ultimate, Halion 6, Nuendo 8.2, Ableton Live 8 Suite, Reaper 4, misc Line6 gear/software, True Temperament Frets on basses and guitars, Korg Kronos, Roland vk-7, Behringer Deepmind 12, Behringer Neutron, Yamaha 02r.....
User avatar
by alanbutterworth on Tue Feb 05, 2019 3:56 am
Thanks for those replies guys.

I don't think either of those suggestions were /are the problem.

I'll see if I can replicate the issue next time I'm in the studio.

Window 10, HP Z800 PC, Dual Intel Xeon X5560@2.80GHz (2 processors), 64Gb RAM, 2 x SSD, 2 x HD, Native Instruments ULTIMATE KOMPLETE 11 plus Symphonic Series Library, Nektar Panorama P6, Komplete Kontrol S25, Studio One 4 (pro), Cubase 9.5 PRO, Dorico 2, Notion 5, Studiolive Series 3 32, various outboard.

4 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 0 guests