14 posts
Page 1 of 1
Has anybody else had a problem with Melodyne studio 4 not able to process polyphonic in Studio one 3? I've been trying to figure it out for a while now, nothing. Melodyne support has been responsive, but they haven't been able to figure it out yet either.

PC AudioLabs, Win 10 Pro 64bit, AMD FX-4350 Quad-Core 4.20 GHz, 32 GB RAM, Studio One Pro, Focusrite Scarlett 18i20
User avatar
by Tacman7 on Thu Jun 14, 2018 6:35 pm
You have editor or studio?

Studio OnePro 4 64bit Win10 i7 7700k 16gb ram
1TB SSD AsusH270M-PLUS interface:StudioKonnekt 48
Melodyne Studio
Where 'IS' Shitcreek? and
'WHY' would you go there without a paddle?
User avatar
by garyshepherd on Fri Jun 15, 2018 4:47 am
It only works with the upgrade to Editor or above.

I have Editor (some good reductions on the upgrade path still) as the version above that was not needed by me.

The Polyphonic mode works well with Editor for me. But you have to select Polyphonic as an option and Melodyne re-examines the audio to render it in Polyphonic mode.

Gary Shepherd

Please note that I may express opinions that are different from yours but I do not intend to cause offence.
____________
iMac 27" 3.3 GHz Intel Core i5, 32 GB Ram, High Sierra OS 10.13.6, 64 bit, Studio One 4 Professional 4.0.1 Build 48247, Melodyne 4 Editor, Digital Performer 9.51, Korg Legacy Wavestation and M1, Arturia minimoog V, Helix Native 1.60, Bias FX Pro 1.6.1.3174, Pod Farm 2.59, EZdrummer 2.1.4, Superior Drummer 3.1, EZkeys 1.2.4, Alesis Q49, Line 6 UX2, Gibson Les Paul Standard, James Tyler Variax JTV-59 and other guitars, synths and drum machines.
User avatar
by shanabit on Fri Jun 15, 2018 6:41 pm
If you dont have Melodyne Editor or Studio version you can't as was mentioned.

If you select the Algorithm tab in Melodyne and you dont see Polyphonic as choice, time to upgrade Melodyne

S1 Pro 3.5.6, Cubase 9.5.30
MR816X, OSX High Sierra 10.13.5
2010 MacPro Dual 2.4 quad,14 GB Ram
User avatar
by j0001s on Sat Jun 16, 2018 5:21 pm
OP said Studio.

And, to answer his question, no, I've not had any issue with Polyphonic. I am behind one release, however, as I experience crashes on the latest release.
User avatar
by Tacman7 on Sat Jun 16, 2018 7:42 pm
j0001s wroteOP said Studio.




I don't get that from his only post.

Studio OnePro 4 64bit Win10 i7 7700k 16gb ram
1TB SSD AsusH270M-PLUS interface:StudioKonnekt 48
Melodyne Studio
Where 'IS' Shitcreek? and
'WHY' would you go there without a paddle?
User avatar
by robertgray3 on Sat Jun 16, 2018 10:16 pm
Tacman7 wrote
j0001s wroteOP said Studio.

I don't get that from his only post.


billmihalik wroteMelodyne studio 4


Are the other features specific to Melodyne Studio working properly when using it in Studio One? It may be worth double checking if Studio properly activated or if it may have fallen back to the Essentials license that came with Studio One.

Mac OS X 10.12.6
MacBook Pro 15" Mid-2014
User avatar
by billmihalik on Sun Jun 17, 2018 7:55 am
Yes I am using Melodyne Studio 4. All other features seam to be working fine, only the polyphonic detection is not working.

PC AudioLabs, Win 10 Pro 64bit, AMD FX-4350 Quad-Core 4.20 GHz, 32 GB RAM, Studio One Pro, Focusrite Scarlett 18i20
User avatar
by j0001s on Sun Jun 17, 2018 10:10 am
A few things to check:

1. Go to Help/About... in Melodyne. It should show Melodyne Studio 4.1.xxxxxx, and your iLok ID.
2. Go to Algorthim/Set Default. It should say Automatic
3. If both of those are correct, select at least one note, and go to Algorithm/Polyphonic Sustain, and it should redetect the passage as polyphonic.
User avatar
by billmihalik on Sun Jun 17, 2018 6:34 pm
I do have the latest version of Melodyne, it is not associated with my iLok though. It never has been. I tried setting default to automatic and only selecting a small section of a track. Same results.

PC AudioLabs, Win 10 Pro 64bit, AMD FX-4350 Quad-Core 4.20 GHz, 32 GB RAM, Studio One Pro, Focusrite Scarlett 18i20
User avatar
by j0001s on Sun Jun 17, 2018 9:15 pm
I don't doubt that you have the latest version. I was suggesting that you check in the "About" while you're running in Studio One to see if it showed up as the right version in Studio One, or if Studio One was pulling the wrong version for some reason.

Anyways, that's all I got... You probably want to open a ticket with Melodyne.
User avatar
by billmihalik on Sun Jun 17, 2018 9:23 pm
Ah, ok. Yes it seems that it is running in Studio one the same as stand alone, and both are newest update. I have opened a ticket with support about a week ago. They are responsive, we've exchanged about 12 emails so far, but they haven't quite figured it out yet.

PC AudioLabs, Win 10 Pro 64bit, AMD FX-4350 Quad-Core 4.20 GHz, 32 GB RAM, Studio One Pro, Focusrite Scarlett 18i20
User avatar
by jpettit on Sun Jun 17, 2018 10:17 pm
it is like you have more than one version running.
Do you by chance have an essential and Studio installed?

1) For HELP Read the Manual.
2) Create a SUPPORT TICKET. "Select Submit a Request".
3) For Comunity Help add your specs to your SIGNATURE AND.
Include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce
Detailed how to HERE.

My Website, Free Studio One Advance Training
SPECS:Win 10 64-bit, 12 Core i7: 32Gb DDR4 ram, 40" 4K monitor, StudioLive 24, Quantum, Faderport16, Central Station Plus, Sceptre 6,Temblor T10, Eris 4.5, HP60, Studio One Pro 4.0, Reaper 5.9, Sonar Platinum
User avatar
by billmihalik on Sun Jun 17, 2018 10:36 pm
No, only studio installed. I've been using it without issue since January. Only recently I've been having problems. I thought maybe it was either the last Studio One V3 update, or the last windows update.

PC AudioLabs, Win 10 Pro 64bit, AMD FX-4350 Quad-Core 4.20 GHz, 32 GB RAM, Studio One Pro, Focusrite Scarlett 18i20

14 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 12 guests