I have ordered a Dante card for my rm16ai and am looking for a small cheap switch. This will be a small closed network, with approx 3 devices so I am thinking of a 5 port switch. I have done research and haven’t found anything that you can turn off az (power saving, EE), which is what is required for Dante.
Anyone have any recommendations for a switch? I use an airport express for wifi, and plan to continue to do so.
Thanks in advance.
The closest I have gotten is an article by Netgear.
https://kb.netgear.com/31291/What-is-IE ... t-Ethernet
It seems to indicate that some of their switches should work.
To my knowledge, any switch that is managed will be able to turn off the energy saving setting.
iMac late 2015, Behringer X-Touch, X-Touch ONE, M-Air mr18, X-Air xr18, x32 with Dante/aes67, x32-rack with Dante/aes67, s16 and sd16 stageboxes, p16 monitor system, TurboSound iQ-speakers, Waves x-wsg with SoundGrid server, Motör 61, BCR-2000, StudioLive 24, FirePod 10, Apogee Ensemble, Alesis HD24, Studio One Pro v4.1.1, Notion 6, NI Komplete 11 Ultimate, Halion 6, Nuendo 8.2, Ableton Live 8 Suite, Reaper 4, misc Line6 gear/software, True Temperament Frets on basses and guitars, Korg Kronos, Roland vk-7, Behringer Deepmind 12, Yamaha 02r.....
I've had no issues with the TPLink TL-SG1008P
8 ports (4 with PoE)
reliable (mine is approx 2 years old)
No dropouts with Dante. (I've pushed 64 channels through it with no issue)
https://www.tp-link.com/lk/products/det ... 1008P.html
SL32ai, RM32ai, SL328AI x2, SL18sAI x2, all Dante.
Studio 192, Digimax FS, Faderport,
Sonar Platinum, Studio One.
Dante Level2 certified.
My understanding is the energy efficient ethernet only causes a problem if something that's moving dante traffic turns it on. Dante hardware doesn't support it but PC hardware usually does. I've successfully used cheap unmanaged switches with EEE to connect four dante devices, no issues. On my laptop I had to be sure to manually disable EEE in the driver.
Much better to use a switch that allows it to be disabled though.
I've used the HPE OfficeConnect switches successfully. Personally prefer them to Netgear options and they tend to be affordable and sufficiently managed.
Users browsing this forum: No registered users and 0 guests