Discuss Sceptre S6 and S8 here
3 posts
Page 1 of 1
Hi all!

I've used my Sceptre6 for six month now with a sort of "temporary position" next to the desk in my home studio. Instead of this setup I'm now looking for monitor stands that ables me to get a better position for the monitors. I've came across two possible stands but before I go off and buy anything You guys might have better suggestions?

From K&M:

From Millenium:

A possible problem I see is that the plate to put the monitor on is smaller than the Sceptre6. I don't know how much of a problem that is though...

Any thoughts in this topic are welcome here! :)

David Fryxelius, Sweden
User avatar
by matthewgorman on Mon Mar 28, 2016 2:08 pm
I have a set of stands for my HS50's, and the plate is smaller than the speaker. I am not a big fan of it, but they seem to be stable enough for where they are.

For my sceptre's, I made my own stands for about $25 usd in wood. I originally made them for the S 8's, but my 6's are sitting on them now. Much sturdier. Very basic design. I made 2 platforms (per stand) to the dimensions of the S8's. Then used 2x4's on the 4 corners. The 2x4's are inside the perimeter, not screwed to the sides. 3/4" plywood for the platforms, finished up with some molding to spruce it up, and some foam to de-couple the speakers from the stands.


Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor
StarTech EC13942 34mm Expresscard
S1Pro V2 , Melodyne Studio 4, Nomad Factory Studio Bundle, Waves , RM16, Studio 192, DP88, Faderport, Central Station Plus, Yamaha HS50 Monitors, Sceptre 6-8 Monitors, Temblor 10.
User avatar
by shanabit on Wed Mar 30, 2016 4:58 pm
I use these with my S6's with Auralex mo pads on them


S1 Pro 4.5.2, Sceptre S6's, MR816X, OSX High Sierra 10.13.6
2010 MacPro Dual 2.4 quad,14 GB Ram,

3 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 0 guests