Dear Studio One users,
the new version Studio One 5.5 is online now! Please find all news in the announcement thread. viewtopic.php?f=151&t=47328 Happy Discussion! Ari
Ari Ahrendt - Quality Assurance Specialist
PreSonus Software Ltd. - Hamburg http://www.presonus.com/products/studio-one Modern electronic Synth Pop........../..........Musicproduction, Support & coaching http://www.denoisary.de/................./...........http://www.arimusik.de/ Windows 10 64-Bit, i7 6700k 4.0 GHz, 16GB RAM, 4TB SSD, Studio One 5 Professional |
Option to Snap Event End to grid !! I'm really excited about this heheh
[macOS High Sierra] Graphics Hardware Acceleration cannot be enabled - S1 has been graphically sluggish for me for certain plugins. Hopefully this will fix it? Yay! |
https://www.youtube.com/watch?v=fcoxHw_N2ag
As seen in this video, Gregor double clicks to make a midi note, then holds Option (Alt on Windows), and drags up to create a chord. This does not seem to be working. When holding Alt and dragging, it just copies the note. I have Scale enabled. As you can see in the Youtube comments, it's not working for anyone else either. What are we missing? ***EDIT - - i figured it out - you have to double click to make a note, but keep your mouse held down, then hold ALT and drag up
Last edited by taylorscott2 on Tue Jan 11, 2022 12:21 pm, edited 1 time in total.
|
Sad to see that they didn't fix the bug where Project mode resets plugin state between tracks at export time. So they give us a default track pause of 0, but if you use it, you're gonna hear pops between tracks if you have any plugins with non-linear characteristics, like compressors, or time-dependent characteristics, like modulation.
|
Personally not excited about this update, was hoping for something more, at least for my needs (still waiting for Inspector and Browser updates).
However, I am sure that a lot of people will be happy with these new features being added to the Project Page.
Presonus Featured Artist (Italy)
My Latest Feature Requests https://answers.presonus.com/73692/s1-essential-feature-plugin-racks https://answers.presonus.com/72506/zoom-to-selection-improvement-vote-if-you-agree Studio One Pro 6 Win10 - AMD Ryzen 9 5900X - 32gb ram DDR4 Gigabyte RTX 3060 Interface: Focusrite 18i20 3rd gen Prophet XL + KeyStep Pro Atom SQ Revelator |
Can anyone confirm they disconnected track visibility in the Arranger from the Scenes in the Console. I believe it was a confirmed bug back in 5.0/5.1. Serious workflow killer for me.
|
normjohnson wroteWow the entire 5.0 - 5.5 release cycle amounted to a grand total of 0 new useful features and improvements for me (with lots of new crashes and bugs). I will definitely not upgrading for awhile now. What would actually be more relevant is how many popular feature requests have been ticked off in the feature requests areas of the forum. Now that's stats I would like to know.
Last edited by PreAl on Tue Jan 11, 2022 2:34 pm, edited 1 time in total.
Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb. Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental). Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths. |
Strom wroteAnyone noticed the output is clipping @ 0 dB (Master & Listen Bus @ 0 dB). Didn't do that before update - I have to pull down the master -0.1 to be save?!? I ran into this with the previous release. To debug it, I created a project with one track with audio that peaked at 0 db. All faders at zero, no plugins. When I exported that single track, I'd get the "output has clipped" error, and the output would typically be .1 - .2 db higher, though I have seen up to .5 db higher. Same error if I export in real time or not. I was just about to submit a ticket (already created a video) when I caught wind of the new release. I'll recheck on this release, and will submit if it still is an issue that I can recreate. |
j0001s wroteStrom wroteAnyone noticed the output is clipping @ 0 dB (Master & Listen Bus @ 0 dB). Didn't do that before update - I have to pull down the master -0.1 to be save?!? This isn't happening on mine. Just had audio peaking at 0db and exported with no error |
The stuck Midi notes is still there.
If you leave an event with a midi note still selected, then when you return you can't move it or deselect it. You have to ctrl+x and ctrl-z on this event and you can edit again. But it is really annoying as I spend 90% of my time in Studio One editing Midi. And I hardly ever do anything related to the updates. |
stignielsen wroteThe stuck Midi notes is still there. Could you record a video of this? Have you submitted a ticket? I am also constantly using midi and this has never happened to me. I even just tried what you said and everything is normal. Have you tried reinstalling? EDIT*** After trying what you said to do over and over, I got it to happen! Midi note is selected but can't move it. I've never experienced this during actual work, but yeah def see what you are talking about |
Strom wroteAnyone noticed the output is clipping @ 0 dB (Master & Listen Bus @ 0 dB). Didn't do that before update - I have to pull down the master -0.1 to be save?!? What format are you exporting to? MP3? WAV? Something else?
Don
S1 v6.x Pro - latest version PreSonus Studio 26, IO 24, Atom Eris E5s iZotope RX10 Advanced Win 11 Pro-32GB RAM-AMD 3900x AMD 5700XT Windows 10 Pro-16 GB RAM MacOS Ventura (13.4) iMac i5 w 8 GB RAM FB group: Studio One Users-Audiobooks, VO and Podcaster focused: https://www.facebook.com/groups/StudioOneNarrationVO/ Studio One and iZotope RX Courses for Narrators/Podcasters/VO: https://www.VOJumpstart.com/ Studio One and iZotope RX Videos for Narrators/Podcasters/VO: https://www.youtube.com/user/RedBaarnsAudio |
As reported elsewhere, midi draw doesn't work for me.
If I hit alt after the note is already down, it instead attempts to copy the note and then I can move it around. Not sure if that's intended. What I'm totally sure about is that midi chord draw simply draws the note in the scale, instead of in a chord. See attached video.
Last edited by risemix on Tue Jan 11, 2022 5:50 pm, edited 1 time in total.
|
risemix wroteAs reported elsewhere, midi draw doesn't work for me. You have to double click to add the midi note and keep your mouse held down, THEN hold alt and drag up. But yes, the whole "chord" thing is extremely misleading, it just draws all the notes of the scale on top of each other. "Major Triad" and "Minor Triads" do work as chords though. |
taylorscott2 wroterisemix wroteAs reported elsewhere, midi draw doesn't work for me. Got strum working. A tad awkward.
Last edited by johnanzinger on Tue Jan 11, 2022 4:36 pm, edited 1 time in total.
|
Users browsing this forum: No registered users and 7 guests