Skip to content

Advanced search…

Expand Quantum with non-Presonus ADAT device - what will I lose?

Discuss Quantum Series Interfaces Here
Post a reply
4 posts
Page 1 of 1
If I expand Quantum via ADAT with a non-Presonus device (eg a Behringer ADA8200), will all those inputs show up in Universal Control in the ADAT View or only as an aggregate pair of channels? I have never added channels via ADAT and not sure what I will miss out on if I don't use a Presonus device. Thanks!
Link to this post { REPLY }
User avatar
by matthewgorman on Fri Dec 20, 2019 12:05 pm
Should show in UC.
Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
Link to this post { REPLY }
User avatar
by radar23 on Wed Jul 08, 2020 4:34 am
third party adat is fine as it's a universal protocol.

But my quantum adat port one does work with out static and there's no sync in from it..

let me know if yours works ok
_.~"~._.~"~._.~"~._.~"~._
Studio One 5 Pro
Quantum, Quantum 2, Didimax FS, FirePro, Firestudio Project, Firestudio Mobile, Art Tubeopto, DBX 386, Maschine 3, Hydrasynth, Analog Heat, Zed 14, Motu MTP AV, Keystep, Beatstep Pro, RD-8, Monomachine, machinedrum, Octatrack, Analog Four, Minilogue XD, Korg Arp, uWave XT, Virus C, Poly Evolver, Mono Poly, MKS-70, Mks-80, Pulse Plus, Blofeld, BassStation 2, ESQ-1. Korg Legacy, Arturia V, NI Ultimate 10, ImpOSCar2, BFD3, DCAM, Largo, Waves Gold.
Acer 7VN-593G, Win10 Pro
Link to this post { REPLY }
User avatar
by j0001s on Sun Jul 12, 2020 12:58 am
radar23 wroteBut my quantum adat port one does work with out static and there's no sync in from it..

let me know if yours works ok


Huh. I also have a bad Adat port one on the Quantum I got recently. Drove me nuts trying to figure it out. I do plan on getting it addressed under warranty. Port two is fine.
Post a reply
4 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 12 guests