4 posts
Page 1 of 1
There is a thread in the Studio One Community forum where a user is asking for some help using with Studio One.

If you have the time and haven't seen it already --- viewtopic.php?f=151&t=33184&p=192284#p192284

-

-------------------------------------------------------------
Studio One Pro - latest / Win10Pro x64 (latest) / i7-6700 @3.8Ghz / 32G / UMC1820 / Event PS8
RC w/Galaxy S7+ / KKS61MK2 / Atom SQ
User avatar
by gottfriedbergmair on Sun Feb 03, 2019 4:15 pm
According to the discussion I will try to answer some of the questions.

PART 1

1) The manual.
It contains nice pictures. But some things are described inaccurately.

2) Impact XT Pad Focus and ATOM Focus Mode
These two things sound the same.
But they are different!

3) Understanding Impact XT Pad Focus.
Because of the pads [16x8], the Impact XT needs an extra "Focus level". When working with Control Link and Pads, you have two options:
a) Global pad mode and b) Pad Focus mode

The next two pictures will show how this works:

First: Pad Focus and global mode vs. Focus mode:

ATOM-Quick-Automation-PadFocus-600-002.JPG
Control Link, Impact XT Pad Focus and global vs. Focus pad modes


A closer look how Control Link handles the pad focus modes

ATOM-Quick-Automation-PadFocus-600-001.JPG
Impact XT and Control Link - how it works


There is a last picture from within Studio One:

ATOM-Quick-Automation-Global-Fokus-600-002.JPG
How it looks in Studio One using the different pad modes.


End of part 1
Gottfried

Win 10 64 i7-7K 32GB 2x M2, Studio One 6 Pro + Fat Channel XT Suite + Studio 192 + Eris E8 + FP2018 + ATOM+ATOM SQ; Keylab mk2 49, Lewitt 441 Flex, Zoom H5, Mackie 402-VLZ4; SW: Arturia V + FX, Melodyne 5 STUDIO, u-he Synths, TAL, Klanghelm, RX Std 10
User avatar
by gottfriedbergmair on Sun Feb 03, 2019 5:09 pm
According to the discussion I will try to answer some of the questions.

PART 2

1) Impact XT Pad Focus = ON
When you turn ON the Pad Focus of Impact XT, than the pads will always change the focus when you hit a pad. Regardless if you hit a pad with ATOM or when you play a key on your keyboard.

Note: When using the mouse, the pad focus is immediatly changed, regardless of the the Pad Focus setting.

2) Impact XT Pad Focus = OFF
Here things are different.
When you play a key or when you hit a pad with ATOM, the pad focus remains. The focus is not changed.

3) The two options with ATOM when Impact Pad Focus = OFF
ATOM offers a special feature when Pad Focus = OFF: The "Focus Mode"
Blue: The pads will not change the focus, the current focus remains
Green: The focus is changed to the new pad, It's the same as if you use the mouse.

Table matrix when using Pad Focus and Focus Mode
Here is a diagram which shows the different condititions and how it should work.

ATOM-Quick-PadFocus-FocusMode-en-001.JPG
Table matrix of Pad Focus AND Focus Mode conditions


First Conclusion Pad Focus Mode vs. Focus Mode
Impact Pad Focus and ATOM Focus mode are different in some ways.

Therefore, it makes no sense to sync ATOM Focus Mode with Impact Pad Focus
(For example:If you switch this mode on, then the other button should be flashing)

I hope this post is helpful.
Gottfried

[Sorry for my English, it is inaccurate in some places :) ]
Last edited by gottfriedbergmair on Mon Feb 04, 2019 2:52 pm, edited 2 times in total.

Win 10 64 i7-7K 32GB 2x M2, Studio One 6 Pro + Fat Channel XT Suite + Studio 192 + Eris E8 + FP2018 + ATOM+ATOM SQ; Keylab mk2 49, Lewitt 441 Flex, Zoom H5, Mackie 402-VLZ4; SW: Arturia V + FX, Melodyne 5 STUDIO, u-he Synths, TAL, Klanghelm, RX Std 10
User avatar
by gottfriedbergmair on Mon Feb 04, 2019 2:47 pm
According to the discussion I will try to answer some of the questions.

PART 3 - The Pattern Editor

I made 3 diagrams which shows the use of the Pattern-Editor with ATOM
The pictures are self-explanatory.

But there are some important things:

a) There are two main modes in Pattern Editor:
- Edit-Mode (Edit patterns)
- Play-Mode (Play Samples with the pads)
- Use the "Editor" button to switch between this two modes
- Studio One will show a step bar when Edit-Mode is active (at the bottom of the step numbers)
b) The ATOM "Focus Mode" will work exact in the same way as explained before (PART 2)
c) The ATOM "Focus Mode" is only usable in Play-Mode
d) You can call Impact XT with "Show/Hide" (Both modes)
e) You can shift the lane by one step to the left or right (Edit-Mode: Nudge Left/Right)
f) In Play Mode use Left/Right buttons to go through the variations (Play mode: Left/Right)

Overview of the Pattern-Editor with ATOM:
ATOM-Quick-PatternEditor-ATOMKeys-ext-600-001.JPG
Overview of the Pattern-Editor with ATOM


Create Patterns with ATOM:
ATOM-Quick-PatternEditor-ATOMKeys-600-002.JPG
Create Patterns with ATOM:


ATOM Commands for the Pattern Editor:
ATOM-Quick-PatternEditor-ATOMKeys-600-003.JPG
ATOM Commands for the Pattern Editor:


[EDIT: Error correction on picture 3]
[EDIT: Added: Move Lanes left/right command in picture 3 :hunf: ]
[EDIT: Forgot the Nudge button in commands]
Gottfried

Win 10 64 i7-7K 32GB 2x M2, Studio One 6 Pro + Fat Channel XT Suite + Studio 192 + Eris E8 + FP2018 + ATOM+ATOM SQ; Keylab mk2 49, Lewitt 441 Flex, Zoom H5, Mackie 402-VLZ4; SW: Arturia V + FX, Melodyne 5 STUDIO, u-he Synths, TAL, Klanghelm, RX Std 10

4 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 4 guests