7 posts
Page 1 of 1
I was playing around with folders and seem to have lost some of my tracks in the Arrange View.

Can anyone tell me how to get them back?

Attachments
S4-1 TRACKS.JPG
Last edited by gwp9999 on Wed Jan 16, 2019 8:08 am, edited 1 time in total.

HP 870 3.40 ghz Intel Core i7-6700 16gb Ram, Win10-64
User avatar
by matthewgorman on Mon Jan 14, 2019 1:09 pm
Hard to see what is going on in the pic. In the list view shown in your pic on the far left of the image, expand the view(s) for the folders and you should see the tracks. If a track is listed with a black dot, click the dot to view the track(s).

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by gwp9999 on Mon Jan 14, 2019 1:26 pm
Hi Matt - thanks for the reply.

On the far left column "# Track", the tracks listed are 1,2,3,4,28,29
All the tracks from 5-27 do not show there.

The same holds true for the tracks showing in the Arrange View.

However, all tracks show in the console view.

There is only one folder (track #1) which is expanded and there are no black dots in either the "# Track" list noted above or the Console (# Channel Group) list.

(Not sure why you aren't able to see the detail as I am able left click, ctrl-scroll wheel the pic to full view in Firefox)

HP 870 3.40 ghz Intel Core i7-6700 16gb Ram, Win10-64
User avatar
by matthewgorman on Mon Jan 14, 2019 1:50 pm
I must have a bad combo of Chrome and old eyes. :oops:

Expand any channel with a rt facing arrow, and you will probably find your missing tracks.

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by gwp9999 on Mon Jan 14, 2019 2:38 pm
Hope this pic is clearer.

Arrange view tracks between 11 and 35 are missing (as well as in the track list)

However, they show in the console.

There are no events in any of the tracks.

Attachments
SO4-B.JPG

HP 870 3.40 ghz Intel Core i7-6700 16gb Ram, Win10-64
User avatar
by Lawrence on Mon Jan 14, 2019 2:45 pm
You're confusing "tracks" with "channels". You have one instrument track (JamStix or BFD) feeding an instrument that has multiple outputs / channels in the mixer.
User avatar
by gwp9999 on Mon Jan 14, 2019 3:10 pm
Thanks for the reply Lawrence. That was it.

I had forgotten I had selected "Show channel numbers in tracks" in Options last night before I shut down SO4. (and without realizing what it would actually do). So this morning when I loaded up, there was my issue!

I deselected this, deleted any Folder tracks and all is good again.

Thank you again!

HP 870 3.40 ghz Intel Core i7-6700 16gb Ram, Win10-64

7 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 44 guests

cron