Discuss Quantum Series Interfaces Here
41 postsPage 1 of 3
1, 2, 3
this happens everyday and it drives me mad. on windows 10 - cpu
1. You tube playing a video
2. next Open studio One project
3. Audio from You tube stops during the loading process of the s1 project.After the project loads.
4. Must hit play again on you tube browser to get audio to play.

I'm aware of the so called fixes that Presonus has said to do, as I've been in contact with support, but it doesn't work.
FWIW I do not allow apllications to take over control, I have only one sound card Quantum thunderbolt 2 enabled @ 44.1khz ,ever other windows audio device is disabled.

I use an Apogee Rosetta via spdif for AD/DA I was using a firestudio mobile before same way, and it never had this issue, this is exclusive to the presonus quantum.

Any idea's?

Cpu:Win11/Intel Core i9-12900K/32GB/AMD Radeon 580
Interface:Antelope Audio Orion Studio Synergy Core/Studiolive Series 3 32s/RME ADI-2/4 Pro SE
Hardware: BAE 1073MPF/Heritage Audio Successor+Symph EQ
Synths: Minimoog/Sequential Trigon 6/Take 5/Pro-800/Korg Prologue 16/Minilogue XD/Deepmind 12/ASM Hydrasynth/Akai Mpc
Pedals: UAFX/Meris LVX + MercuryX
DAW: S1 v6 Latest version
User avatar
by jpettit on Thu Nov 22, 2018 10:48 pm
Do you have the Windows default playback device set to not have exclusive control?

My Website, Free Studio One Advance Training
SPECS: Win 11 22H2, 18 Core i9: 32Gb DDR4 ram, 42" 4K monitor, StudioLive 24/16, Faderport16, Central Station Plus, Sceptre 6, Sceptre 8, Temblor T10, Eris 4.5, HP60, Studio One Pro latest, Test Platforms Reaper latest, Cakewalk latest
User avatar
by jonhamilton2 on Fri Nov 23, 2018 4:35 pm
Exclusive mode is disabled from allowing apps to control it.

Cpu:Win11/Intel Core i9-12900K/32GB/AMD Radeon 580
Interface:Antelope Audio Orion Studio Synergy Core/Studiolive Series 3 32s/RME ADI-2/4 Pro SE
Hardware: BAE 1073MPF/Heritage Audio Successor+Symph EQ
Synths: Minimoog/Sequential Trigon 6/Take 5/Pro-800/Korg Prologue 16/Minilogue XD/Deepmind 12/ASM Hydrasynth/Akai Mpc
Pedals: UAFX/Meris LVX + MercuryX
DAW: S1 v6 Latest version
User avatar
by jonhamilton2 on Mon Nov 26, 2018 6:55 am
anyone got a clue, or is this just a defective unit?

Cpu:Win11/Intel Core i9-12900K/32GB/AMD Radeon 580
Interface:Antelope Audio Orion Studio Synergy Core/Studiolive Series 3 32s/RME ADI-2/4 Pro SE
Hardware: BAE 1073MPF/Heritage Audio Successor+Symph EQ
Synths: Minimoog/Sequential Trigon 6/Take 5/Pro-800/Korg Prologue 16/Minilogue XD/Deepmind 12/ASM Hydrasynth/Akai Mpc
Pedals: UAFX/Meris LVX + MercuryX
DAW: S1 v6 Latest version
User avatar
by jpettit on Mon Nov 26, 2018 9:33 am
Normaly the advice I gave you solves most problems with coexistence with win 10 audio.

The Quantum ASIO driver is a bit different than the average ASIO driver in order for them to get 2ms response.

You have few options.
1) Open a support ticket. If it still continues after their help open a feature request to add the ability.
2) Start the Quantum S1 process before opening YouTube.

My Website, Free Studio One Advance Training
SPECS: Win 11 22H2, 18 Core i9: 32Gb DDR4 ram, 42" 4K monitor, StudioLive 24/16, Faderport16, Central Station Plus, Sceptre 6, Sceptre 8, Temblor T10, Eris 4.5, HP60, Studio One Pro latest, Test Platforms Reaper latest, Cakewalk latest
User avatar
by jonhamilton2 on Mon Nov 26, 2018 10:03 am
Thanks jpettit I'll create a support ticket

Cpu:Win11/Intel Core i9-12900K/32GB/AMD Radeon 580
Interface:Antelope Audio Orion Studio Synergy Core/Studiolive Series 3 32s/RME ADI-2/4 Pro SE
Hardware: BAE 1073MPF/Heritage Audio Successor+Symph EQ
Synths: Minimoog/Sequential Trigon 6/Take 5/Pro-800/Korg Prologue 16/Minilogue XD/Deepmind 12/ASM Hydrasynth/Akai Mpc
Pedals: UAFX/Meris LVX + MercuryX
DAW: S1 v6 Latest version
User avatar
by jonhamilton2 on Wed Nov 28, 2018 5:06 pm
I removed my apogee from the equation and found the same problem exists using the main outs from quantum. Anyone else got a clue, as tech support,still hasn't said a thing.

Cpu:Win11/Intel Core i9-12900K/32GB/AMD Radeon 580
Interface:Antelope Audio Orion Studio Synergy Core/Studiolive Series 3 32s/RME ADI-2/4 Pro SE
Hardware: BAE 1073MPF/Heritage Audio Successor+Symph EQ
Synths: Minimoog/Sequential Trigon 6/Take 5/Pro-800/Korg Prologue 16/Minilogue XD/Deepmind 12/ASM Hydrasynth/Akai Mpc
Pedals: UAFX/Meris LVX + MercuryX
DAW: S1 v6 Latest version
User avatar
by alfonsosantimone on Wed Nov 28, 2018 11:24 pm
In the same boat here...
User avatar
by jonhamilton2 on Thu Nov 29, 2018 1:59 pm
I'm calling tech support now, as i'm about to figure out if this units getting replaced or not, i've never had an issue like this before.
Pretty damn terrible experience here.

Cpu:Win11/Intel Core i9-12900K/32GB/AMD Radeon 580
Interface:Antelope Audio Orion Studio Synergy Core/Studiolive Series 3 32s/RME ADI-2/4 Pro SE
Hardware: BAE 1073MPF/Heritage Audio Successor+Symph EQ
Synths: Minimoog/Sequential Trigon 6/Take 5/Pro-800/Korg Prologue 16/Minilogue XD/Deepmind 12/ASM Hydrasynth/Akai Mpc
Pedals: UAFX/Meris LVX + MercuryX
DAW: S1 v6 Latest version
User avatar
by Skip Jones on Thu Nov 29, 2018 3:03 pm
FWIW, neither PreSonus or Support monitors here.

Skip

Please add your specs to your SIGNATURE.
Search the STUDIO ONE 4 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.


Windows 10 X 64 : AMD Phenom II X 4 945, ATI Radeon 5450 / 512 RAM - 8GB RAM / 1T SATA, Mac Mini (Late 2014), Faderport and Faderport 8, Yamaha S-08 Synth, Fishman TriplePlay Guitar MIDI, Logidy Controller, assorted PreSonus Gear
User avatar
by jonhamilton2 on Thu Nov 29, 2018 3:50 pm
Thanks Skip

Cpu:Win11/Intel Core i9-12900K/32GB/AMD Radeon 580
Interface:Antelope Audio Orion Studio Synergy Core/Studiolive Series 3 32s/RME ADI-2/4 Pro SE
Hardware: BAE 1073MPF/Heritage Audio Successor+Symph EQ
Synths: Minimoog/Sequential Trigon 6/Take 5/Pro-800/Korg Prologue 16/Minilogue XD/Deepmind 12/ASM Hydrasynth/Akai Mpc
Pedals: UAFX/Meris LVX + MercuryX
DAW: S1 v6 Latest version
User avatar
by jonhamilton2 on Thu Nov 29, 2018 8:48 pm
I'm beyond let down by this, such a PITA

Cpu:Win11/Intel Core i9-12900K/32GB/AMD Radeon 580
Interface:Antelope Audio Orion Studio Synergy Core/Studiolive Series 3 32s/RME ADI-2/4 Pro SE
Hardware: BAE 1073MPF/Heritage Audio Successor+Symph EQ
Synths: Minimoog/Sequential Trigon 6/Take 5/Pro-800/Korg Prologue 16/Minilogue XD/Deepmind 12/ASM Hydrasynth/Akai Mpc
Pedals: UAFX/Meris LVX + MercuryX
DAW: S1 v6 Latest version
User avatar
by jonhamilton2 on Sat Dec 01, 2018 10:36 am
2 days ago, I left them a message letting them know I'd be away from my studio for about 3 months as I'm going back on the road and to please call me so we could figure out the issue here, and no response. SMH this is extremely frustrating, this will the last time I ever buy an interface from them, nothing but issues.

I should mention, they will not speak on the phone when it comes to interfaces. what a joke

Cpu:Win11/Intel Core i9-12900K/32GB/AMD Radeon 580
Interface:Antelope Audio Orion Studio Synergy Core/Studiolive Series 3 32s/RME ADI-2/4 Pro SE
Hardware: BAE 1073MPF/Heritage Audio Successor+Symph EQ
Synths: Minimoog/Sequential Trigon 6/Take 5/Pro-800/Korg Prologue 16/Minilogue XD/Deepmind 12/ASM Hydrasynth/Akai Mpc
Pedals: UAFX/Meris LVX + MercuryX
DAW: S1 v6 Latest version
User avatar
by rodrigojimenez2 on Sun Dec 02, 2018 6:22 pm
I use Ableton and I have the same issue, it's not just you tube affected. All the other applications go mute. I also unchecked the exclusive control. I have to turn the interface off and then turn on and after that sometimes it solves it, but it shouldn't be that way. Before this interface I had a Focusrite 2i4, which is very simple, and never had a similar problem. This is very annoying, I may have to return the interface and get another brand. I'll check if there is a solution in the next days.
User avatar
by alfonsosantimone on Mon Dec 03, 2018 6:24 am
Hi all, i don't want to bother Presonus at all. But i must say that i'm not at all satisfied by the user support quality. Don't get me wrong, I don't want to point my finger on anyone personally nor to Presonus as a working business. But these are the facts.

1. Several people claims to get problems about Quantum driver's multiclient support.

2. Direct user support keeps suggesting me to reset my Win10 system, wich works perfectly in every aspect. I know that Windows is a can of worms but i can't just invest 4 days to reinstall all my system because i'm in the middle of several works on my DAW (i'm a professional working musician/composer/arranger/producer).

3. I would really like to get some test results by Presonus in the same multiclient context. I guess the would realize that some problems do exist.

well...i'll just wait for next drivers updates...but then (as a professional musician that often needs several programs open at once, DAW, notation, media players, youtube, etc.) i'll have to find solution with othjer hardware.

Sadness :-(

a.
User avatar
by jpettit on Mon Dec 03, 2018 12:34 pm
Have you guys tried this?
viewtopic.php?f=359&t=30593
Switching the Sample rate.

My Website, Free Studio One Advance Training
SPECS: Win 11 22H2, 18 Core i9: 32Gb DDR4 ram, 42" 4K monitor, StudioLive 24/16, Faderport16, Central Station Plus, Sceptre 6, Sceptre 8, Temblor T10, Eris 4.5, HP60, Studio One Pro latest, Test Platforms Reaper latest, Cakewalk latest
User avatar
by Lawrence on Tue Dec 04, 2018 4:39 am
Here's how I get around the general "crappiness" of Windows Audio device shaing. It may work for you as well. Voicemeter is free.

In the image it all plays at the same time. Studio One is using the ASIO driver and Windows Audio is going to same hardware output.

vm-setup.png
User avatar
by PAE Seth on Tue Dec 04, 2018 9:26 am
I stopped using my interface for Windows Audio years ago.

I have a Central Station. I feed Optical TOSLINK from my computer's onboard sound card to the CS, then I use S/PDIF output from the Quantum to the other digital input on the CS. I simply switch Digital Source on the CS when I need Studio One or Windows Audio playback.

Don't blame the Quantum because Windows has poor Audio handling. The Quantum isn't a Camry, it's a drag racer that only runs on the track. :)

PC #1: Asus Prime Z690-P, i5-12600k 10-core (6+4), 32GB DDR4 3200 MHz, RTX 3060 12GB, ADATA XPG 512GB M.2 NVMe SSD, 2 x 1TB WD Black HDD

PC #2: ASUS X299 Prime Deluxe II, i7-7820X 8c/16t, 16GB 2666 MHz DDR4, GTX 1060 3GB, Samsung 970 EVO NVMe M.2 SSD (Win10 Pro), Samsung 860 EVO SATA SSD (Win11 Pro), OWC Aura 512GB NVMe M.2, 2 x 1TB HDD

Mac: 2010 Mac Pro 6 core 3.33 GHz, 32GB 1333 MHz DDR3, AMD RX 5500 XT 8GB, Alpine Ridge Thunderbolt 3 Card, Aquantia 10Gbps AVB card, Dual eSATA PCIe + Stardom 8xHDD Raid Tower
User avatar
by Skip Jones on Tue Dec 04, 2018 9:30 am
I run the same Central Station™ set up. Works well and I can select the S III console, the Quantum or digital with the push of a button. Sweet!

:thumbup:
User avatar
by jonhamilton2 on Sun Dec 09, 2018 6:03 pm
I have a monitor station 2 for handilng audio streams as well, this doesn't neglect the fact Presonus has a poorly written driver with quantum and sample rates! Blame it all you want on windows,but even their modest Presonus Firestudio Mobile, never had this issue. This is a bad driver,as you can tell it's happening on various cpu's here.

Cpu:Win11/Intel Core i9-12900K/32GB/AMD Radeon 580
Interface:Antelope Audio Orion Studio Synergy Core/Studiolive Series 3 32s/RME ADI-2/4 Pro SE
Hardware: BAE 1073MPF/Heritage Audio Successor+Symph EQ
Synths: Minimoog/Sequential Trigon 6/Take 5/Pro-800/Korg Prologue 16/Minilogue XD/Deepmind 12/ASM Hydrasynth/Akai Mpc
Pedals: UAFX/Meris LVX + MercuryX
DAW: S1 v6 Latest version

41 postsPage 1 of 3
1, 2, 3

Who is online

Users browsing this forum: No registered users and 4 guests