8 posts
Page 1 of 1
I cannot get any conneting to Studiolive 32 III from 32r. trough SW5E AVB Box because it turn to DIGI-Gain.and I do not know how to setup for this. SW5E AVB. is very hard to get into.Look Shot Screen.

Attachments
stage .jpeg
stage .jpeg (31.69 KiB) Viewed 3284 times
digi gain.jpg
digi gain.jpg (24.23 KiB) Viewed 3301 times
Last edited by sheriffen on Mon Jul 09, 2018 10:14 am, edited 1 time in total.
User avatar
by matthewgorman on Mon Jul 09, 2018 9:43 am
Sounds like you may have a firmware mismatch, or you may be in monitor mode with the 32R. If you put the 32R in Stagebox Mode, not Monitor Mode, then you should have preamp control from the mixer.

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by sheriffen on Mon Jul 09, 2018 9:56 am
I also try this, NO CONNENTING :-)
User avatar
by matthewgorman on Mon Jul 09, 2018 9:59 am
what firmware is installed on the console and the rack mixer?

What jacks on the AVB switch are you connecting to?

What jacks on the back of the console and rack are you connected to?

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by sheriffen on Mon Jul 09, 2018 10:18 am
Firmware on Both. 1.8.14273
From Studiolive Network out to IN 2. AVB and 3 out to 32r.
User avatar
by matthewgorman on Mon Jul 09, 2018 10:26 am
I can't put my hands on the release notes, but have you tried the public beta firmware?

viewforum.php?f=380

Also, did you update the firmware on the AVB switch? I am trying to see if it needs an update out of box, but it wouldn't hurt anything to go through that process and make sure.

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by sheriffen on Mon Jul 09, 2018 10:44 am
I do not know how to update AVB Box ??
User avatar
by matthewgorman on Mon Jul 09, 2018 11:15 am
I'm being told that the switch does not need an update. At this point I would try the beta firmware I linked above.

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5

8 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 24 guests