526 postsPage 25 of 27
1 ... 22, 23, 24, 25, 26, 27
In studio one 4, I cannot get complete functionality in DAW mode on studio live 3. Cannot hear audio on tracks? please help
User avatar
by PreAl on Fri Jun 15, 2018 6:51 pm
lougiusto wroteIn studio one 4, I cannot get complete functionality in DAW mode on studio live 3. Cannot hear audio on tracks? please help


Welcome to the forum. Please create a new thread.

Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb.
Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental).
Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths.
User avatar
by kaygeeeff on Mon Jun 18, 2018 3:55 am
Hi All!
I'm not clear on the use of Track Markers in the Project Page?
They don't appear to serve any useful function except to click on to reset the 2 sec interval and to reset themselves to the Track content but, as they are there, I must be missing something???
Cheers!

Presonus Studio One 6 Pro (always the latest update!) Presonus Sphere Member, Presonus StudioLive 24.4.2.Ai. Too many Waves Plugins. Melodyne 5 Pro, EZ Drummer 2, EZ Keys, Active Drummer, Active Keys. Notion 6. Ozone 10. Ozone Suite including RX 10 etc.
Owner: Footloose Recording Studios. NSW. Australia
User avatar
by lisarowe on Mon Jun 18, 2018 8:34 am
They don't appear to serve any useful function except to click on to reset the 2 sec interval and to reset themselves to the Track content but, as they are there, I must be missing something???

The marker track and the arranger track are two of my favorite features in Studio One!
Multitracks can get big but the markers can show you where you are in your song.
marker track 2.png

Hard to see, but these markers say things like verse, chorus, bridge, etc. very helpful when zoomed into a section of drums for example.
marker track 3.png


Yesterday, I used them to help me organize a song and a piece of sheet music I want to work with. I was messing with the chord track. I marked the section and page numbers in the marker track and made an arranger track. Then I ran 'detect chords' with less than ideal results. I've done a lot of clean up here.
marker track 1.png

Use markers to create sections in the arranger track (right click on a marker to see the option) and you can easily find sections and loop them.
Use your imagination!
: )

Dell Laptop, Intel Quad Core i7, 16GB RAM, Windows 10 64-bit, Studio One Pro 5.1
Rode AI-1
Audiobox 44VSL
AKAI 25 and Keystep 32 midi controllers
8-)
User avatar
by jonnylipsham on Mon Jun 18, 2018 11:21 am
lisarowe wrote
They don't appear to serve any useful function except to click on to reset the 2 sec interval and to reset themselves to the Track content but, as they are there, I must be missing something???

The marker track and the arranger track are two of my favorite features in Studio One!
Multitracks can get big but the markers can show you where you are in your song.

: )


I think he's talking about the markers in the Project Page, rather than marker track and/or arranger track.

Jonny Lipsham - Studio One & Notion Specialist



Scan 3XS Audio PC (Octa-core Intel 9th Gen i7 4.5GHz 16GB RAM) Windows 10 Home Advanced | 21.5-inch iMac
2.3GHz dual-core 7th gen Intel Core i5 processor, (Turbo 3.6GHz) 8GB 2133MHz DDR4 | Studio One Professional | Notion 6 | Notion Mobile | Audiobox 96 USB | Studio 1824c | StudioLive 32SC mixer | FaderPort (2018) | Monitor Station v2 | Eris E5 & Eris 6 Pro monitors | HD7 & HD9 cans
User avatar
by lisarowe on Mon Jun 18, 2018 1:01 pm
I think he's talking about the markers in the Project Page, rather than marker track and/or arranger track.

Oops.
Looking forward to reading someone else's take on those then -- clearly, I need it.
: )

Dell Laptop, Intel Quad Core i7, 16GB RAM, Windows 10 64-bit, Studio One Pro 5.1
Rode AI-1
Audiobox 44VSL
AKAI 25 and Keystep 32 midi controllers
8-)
User avatar
by georgelea on Tue Jun 19, 2018 6:08 pm
I did a rather quick cursory look for upgrade prices but could find none. If I've got Artist 3.5 what's the upgrade price to vers. 4.0?

Thanks,
GPL

i7-12650H CPU, 32Gig RAM/Win 11 Pro. PreSonus 1824C, Native Instr S88 Mk1, ATOM SQ, PreSonus Sphere, Sonar Platinum, SampleTank4, BIAB 2023.
User avatar
by DrummaMan on Tue Jun 19, 2018 6:13 pm
DrummaMan wrote
crussell wrote
crussell wroteThey are tracking down several Melodyne large issues.
What resolution are you running?

I have an iMac Pro which runs at 5K. I'll create a ticket tomorrow. I want to do more testing first to help narrow it down.


I'm currently setting up an iMac 2.3 GHz i5, 16GB for work. I always install StudioOne for demos. I created a new song, added a drum loop, edited it with Melodyne, I then detached and attached the editor about 5 times. It then displayed the same weird screen that appeared on my iMac Pro. There was no data on the screen and the Melodyne window had a dark grey additional window attached to it. Then SOP4 crashed. I'll have to send a screen shot tomorrow. So I consider that good news that my iMac Pro isn't actually misbehaving.


Yes, I also experienced this with Windows 10 Pro x64 and Melodyne Studio 4

The other issue is that Melodyne does not automatically display the blobs when opening a clip from SOP4 for editing. - you have to now tell Melodyne you want to see the blobs by clicking on the only track shown in the left column and selecting the color blobs. It's behaving like there is more than one track being edited...[/quote]

The gray box is confirmed - Celemony said it's a bug in Studio One Pro 4.

Hopefully Presonus fixes it in the first round of updates...

The work-around suggested was to dock then undock the editor window...

Add "Include Mix FX" Check Box when saving Custom FX Chains: https://answers.presonus.com/73924/save ... x-channels - THUMB IT UP!!
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Windows 10 Pro x64 running on a custom tower PC with ASUS Pro WS X299 Sage II MOBO/ LGA 2066 Intel Core i9 X (12 Core), 64GB RAM, 1TB M.2 (OS), 2TB M.2 (Sample Libraries) 2TB SSD for audio, 1TB Raptor Audio Backup, 4TB Storage/Backup Drive, (1) UAD2 Octo, (2) UAD2 Quad, Lynx Aurora 16/AES16e, Radeon RX 570 ROG Video Card
User avatar
by hotjams on Wed Jun 20, 2018 12:19 am
Faster, snappier, performance
it's very noticeable on my system. :D
Last edited by hotjams on Thu Jun 21, 2018 2:40 am, edited 2 times in total.

2017 Macbook Pro,Quad Core I7 2.9Ghz, 16G , 256G SSD, S13.4 pro, Apollo Twin Duo, Samsung 256 T-3 SSD, Samsung 500 T-3 SSD, iRig 38 Key, Strat Clone HSS, Taylor 714, Samsung Pc I7 dual core, 8g ram, 1tb SSD, EZDrummer, Jamstix, BIAB PC and Mac, Melodyne Studio 4, EZKeys,
User avatar
by lechbialek on Wed Jun 20, 2018 2:51 am
It's been a while since version 4 was released, any word on an update that fixes the sample pool and other issues that were found?

Presonus support have acknowledged there is an issue and they are working on it, but didn't give an ETA for a fixed version.

For me version 4 is unusable as it is now because external files are not copied to the sample pool and therefore "Copy external files" doesn't collect my samples, very frustrating if your work with multiple computers in different locations.

Lech
User avatar
by PreAl on Wed Jun 20, 2018 4:06 am
lechbialek wroteIt's been a while since version 4 was released, any word on an update that fixes the sample pool and other issues that were found?

Presonus support have acknowledged there is an issue and they are working on it, but didn't give an ETA for a fixed version.

For me version 4 is unusable as it is now because external files are not copied to the sample pool and therefore "Copy external files" doesn't collect my samples, very frustrating if your work with multiple computers in different locations.

Lech


No and It's been a month. Any patches released will be at the top of the forums plus you can.update via studio one.

I'm sticking with V3 for at least 3 months for production, I never expect initial releases to be bug free. I hope they take their time getting it right and don't bow down to pressure.

Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb.
Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental).
Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths.
User avatar
by Lasperanza on Wed Jun 20, 2018 12:21 pm
PreAl wrote
lechbialek wroteIt's been a while since version 4 was released, any word on an update that fixes the sample pool and other issues that were found?

Presonus support have acknowledged there is an issue and they are working on it, but didn't give an ETA for a fixed version.

For me version 4 is unusable as it is now because external files are not copied to the sample pool and therefore "Copy external files" doesn't collect my samples, very frustrating if your work with multiple computers in different locations.

Lech


No and It's been a month. Any patches released will be at the top of the forums plus you can.update via studio one.

I'm sticking with V3 for at least 3 months for production, I never expect initial releases to be bug free. I hope they take their time getting it right and don't bow down to pressure.


Me too. It's the first time I've not upgraded within the Studio One cycle. There are issues affecting my current workflow (one of them being the Melodyne issue), so am staying put for now. My work flow trumps what version 4 brings new to the table.

Studio One 5.1 - Windows 10 x64, Ryzen 5 5600x, 32GB DDR4 @3600
Adata M.2 500GB for OS, Gigabyte 1TB M.2 & Samsung 850 SSD x2 for Audio and Romplers.
IIyama 40 inch LED monitor, Presonus Faderport 2
RME Raydat PCI-E, SPL Crimson Rev.3, Clarett 8 Pre USB
Focal Twin 6BE monitors
Numerous microphones from Audio Technica, AKG, SE Electronics, Neumann...and my favourite Mojave 301 FET.
User avatar
by Vocalpoint on Fri Jun 22, 2018 9:14 am
Speranza wrote It's the first time I've not upgraded within the Studio One cycle.


+1

For the first time since I have been a customer - I did not upgrade. Actually - let me rephrase - I have purchased the upgrade - but there is no chance I will consider installing it until I see some semblance of stability (and improvements)

Given the complexity of S1 - it was inevitable that at some point - a release would come along that just does not "feel right" in terms of value (Stability, performance, ease of use) and features I would actually use (Cannot really see a lot here that I need right now).

The last release of v3 is like a battleship over here and nothing makes me more crazy than downtime or chasing bugs.

But I believe in Presonus and I will wait it out. (for both stability and hopefully the appearance of some more useful features)

VP

DAW: Studio One Pro 6.5.1.96553 | Host OS: Windows 10 Pro 22H2 | Motherboard: ASUS PRIME z790-A | CPU: Intel(R) Core(TM) i5-13600K | RAM: Corsair Vengeance LPX 64GB | Graphics: Intel UHD 770 (HDMI) | Audio Interface: RME UCX II (v1.246) | OS Drive : Samsung 990 PRO (1TB) | Media Drive: Samsung 970 EVO Plus (500GB) | Libraries: Samsung 970 EVO+ (2TB) | Samples : Seagate FireCuda (2TB) | Monitoring: Presonus Monitor Station v2 + Presonus Eris 5 | MIDI Control: Native Instruments Komplete S61 & Presonus ATOM
User avatar
by michaelweber2 on Sat Jun 23, 2018 3:36 pm
So far love S1/4 it’s been rock solid and reliable. Haven’t seen any problems but I wish it had a few of the user requests like “sound on sound” for one but in all great software, hoping for the future.
User avatar
by AndySweet on Sun Jun 24, 2018 10:49 am
It would have been rude of me not to upgrade as I was one of the people crying out for an inbuilt drum editor.Patterns is great hopefully see some improvement in the future.Would love to be able to convert a midi loop into a pattern and vice versa.
User avatar
by seanclarke on Sun Jun 24, 2018 11:02 am
Having used the upgrade for a while, I like the new additions and tweaks.

The pattern editor is not the finished article, but it is a great foundation to build on. It will be fairly simple for Presonus to add the types of features to the pattern editor that people have been saying is missing...I suspect a point update will deal with it...maybe even a more direct way of getting to the pattern editor- it deserves it!

Chord track is also a great start- extracting and changing chord progressions is pretty cool...I suspect we will get more development here when ARA2 is officially published by Melodyne (Presonus have said as much!)

I am pretty much a happy camper! Its a :+1 from me.

Studio: S1, BWS, Live and way too many plugs- i7 Win 10 X64, X32 , Nektar P6, Roland TD27, Elektron OT, A4 and RYTM, P08, DM12, modular stuff, basses, guitars and amps!
User avatar
by stratfordmichael on Tue Jun 26, 2018 11:33 pm
Hi I am trying out the new AAF file making system and finding that when I reopen the created AAF file all the song files are there however they are all out of time. I am not hugely tech savvy so its most likely I am missing something. Can someone help with advice?
User avatar
by rhetrick on Wed Jun 27, 2018 2:27 pm
Not sure if this is in this thread or not or even if I just did something I couldn't figure out how to undo but today I programmed a pattern in Impact and then afterwards, Impact wanted to be played on every other midi track I started from the controller keyboard. Crazy thing, you would hear the new instrument AND Impact together but Impact was not showing on the mixer readings! It was as if Impact had become HAL from 2001.

So, I had to bounce Impact to audio and delete the entire channel to get it to stop.

https://tubeunddiode.bandcamp.com Tube und Diode - Retro EBM, Electro, Hard Synthpop. On bandcamp. Composed and Mastered in S1.
https://trickinthehat.bandcamp.com Pet Shop Boys influenced 80s pop. Free! All in S1.

Windows 10. User of S1 since the day it was first ever released. I have no idea what my computer specs are.
User avatar
by hotjams on Sat Jun 30, 2018 11:22 pm
Edit with Melodyne completely broken and so it goes.....freezes, crashes, absolutely non usable. Ok...update. It just seems to be happening with some of my older files. Not sure this really needs attention.
Last edited by hotjams on Mon Jul 02, 2018 4:21 am, edited 1 time in total.

2017 Macbook Pro,Quad Core I7 2.9Ghz, 16G , 256G SSD, S13.4 pro, Apollo Twin Duo, Samsung 256 T-3 SSD, Samsung 500 T-3 SSD, iRig 38 Key, Strat Clone HSS, Taylor 714, Samsung Pc I7 dual core, 8g ram, 1tb SSD, EZDrummer, Jamstix, BIAB PC and Mac, Melodyne Studio 4, EZKeys,
User avatar
by jcbiffro on Sun Jul 01, 2018 12:54 pm
Don't suppose there's a bug-patch release on the horizon? S1 4 has been out for a while now!

526 postsPage 25 of 27
1 ... 22, 23, 24, 25, 26, 27

Who is online

Users browsing this forum: No registered users and 45 guests