Page 1 of 1

Polling MIDI Notes every second or so

Posted: Thu Jul 19, 2018 2:27 pm
by PreAl
Am I right in thinking this is "normal"?

Every second this polls...

Capture3.PNG


Can't say I'm excited about the behaviour...

Thx

Re: Polling MIDI Notes every second or so

Posted: Thu Jul 19, 2018 3:28 pm
by AlexTinsley
This is normal.

It's a message to ensure that the connection between the DAW and FaderPort is still active. This has been implemented for some time now.

Re: Polling MIDI Notes every second or so

Posted: Mon Dec 03, 2018 1:18 pm
by sinan@bozuk.org
You can configure it as a Mackie Control surface in Logic, and that horrible sound stops in Logic. However, it still wreaks havoc in MainStage. I finally removed FaderPort from my setup. It's in the closet now.

Re: Polling MIDI Notes every second or so

Posted: Wed Dec 12, 2018 5:56 am
by peterbirch
This action is a pain in the ask no questions. Yes I understand the reasoning behind it but if it is always there and the same surely it can be filtered out from the display. If I want to see what my synth is communicating, with two faderports, it is next to impossible to see messages.
The words ship, happeth_o_tar and spoil spring to mind....

Re: Polling MIDI Notes every second or so

Posted: Wed Dec 12, 2018 6:34 am
by PreAl
Does this happen with new faderport?

Re: Polling MIDI Notes every second or so

Posted: Wed Dec 12, 2018 2:45 pm
by Jemusic
PreAl wroteDoes this happen with new faderport?


No. New Faderport is silent while you are not touching it. I have both are Faderport and FP8. Yes I have also noticed the fact FP8 is sending this but it has not seemed to have effected anything though in terms of normal operations etc.

Just out of interest the message I get regularly is a poly pressure message. I see that is different from you were getting. I can just click poly pressure in the midi filter area at the top of the page and it all stops and goes silent.