Page 1 of 1
Increments when moving the Fader Port and Studio One
Posted: Mon Feb 12, 2018 8:32 am
by PreAl
Using SHIFT and the pan button on the Fader Port One allows me to move the time marker one bar at a time.
How can I reduce these increments? The quantize grid settings does not seem to do anything... Thanks!
(Edited for corrections).
Re: Increments when moving the Fader Port and Studio One
Posted: Mon Feb 12, 2018 10:20 am
by themaartian
I just tried mine. Moves one bar at a time in either direction.
When I use it, it shows up as the FaderPort encoder, but no parameter is shown, so it's gotta be a Native mode thing. No reference in the User Guide. An initial quick Google turned up nothing either.
I also checked the faderport.surface.xml file in
C:\Program Files\PreSonus\Studio One 3\devices\PreSonus\FaderPort
and found no reference to the state of SHIFT engaged and ENCODER (pan knob) operated.
Puzzled.
Re: Increments when moving the Fader Port and Studio One
Posted: Tue Feb 13, 2018 2:24 pm
by PreAl
I should have written it moves one bar at a time my bad.
Question is how to change this?
Are we stuck?
Thanks..
Re: Increments when moving the Fader Port and Studio One
Posted: Wed Feb 14, 2018 8:15 am
by Bbd
Only one bar at a time using Shift and the Encoder knob.
Re: Increments when moving the Fader Port and Studio One
Posted: Wed Feb 14, 2018 8:56 am
by PreAl
Re: Increments when moving the Fader Port and Studio One
Posted: Fri Feb 16, 2018 1:42 pm
by PreAl
Amazed they haven't sorted this, seems kinda obvious thing to do, otherwise it's back to flipping between the mouse. Is this the same with Faderport 8 or 16?
Re: Increments when moving the Fader Port and Studio One
Posted: Fri Feb 16, 2018 3:59 pm
by themaartian
You could use markers (Shift-Mark (Loop). Then Shift-Next (User) and Shift-Previous (Punch) to move between markers.
Re: Increments when moving the Fader Port and Studio One
Posted: Fri Feb 16, 2018 4:04 pm
by PreAl
themaartian wroteYou could use markers (Shift-Mark (Loop). Then Shift-Next (User) and Shift-Previous (Punch) to move between markers.
I just want to use my faderport as explained in OP. Kinda crazy we can't zoom into beats or even into more detail. There are no real workarounds other than use a mouse
Re: Increments when moving the Fader Port and Studio One
Posted: Tue Jul 17, 2018 2:35 pm
by PreAl
Maybe I'm hallucinating but this appears fixed with Studio One Version 4 and latest Fader Port One classic firmware (recently released). Seems to move by the beat.
Re: Increments when moving the Fader Port and Studio One
Posted: Tue Jul 17, 2018 9:32 pm
by Bbd
Just checked on my side and it still works only one bar at time.
Re: Increments when moving the Fader Port and Studio One
Posted: Wed Jul 18, 2018 1:55 am
by PreAl
Bbd wroteJust checked on my side and it still works only one bar at time.
You've updated the firmware in the last few weeks?
Re: Increments when moving the Fader Port and Studio One
Posted: Wed Jul 18, 2018 3:32 am
by Bbd
Yep. FP16 FW is 2.02.
Re: Increments when moving the Fader Port and Studio One
Posted: Wed Jul 18, 2018 5:15 am
by PreAl
Weird.