Temblor T10 and Temblor T8
10 posts
Page 1 of 1
I plan on adding a Subwoofer to my system, and I'm considering buying one of the Temblor Series Sub. The Question I have is which one best suits my Eris 4.5 Monitors? I know the T10 has higher wattage, deeper bass, and a bypass foot switch, but is it a good match for my Eris 4.5s or is the T8 a better match?

Thanks in advance for any help you can provide.
Last edited by frankpacheco on Sat Mar 14, 2015 9:52 pm, edited 1 time in total.

Audiobox iTwo USB Audio interface
Behringer U-PHORIA UMC404HD USB Audio Interface
Presonus Eris 4.5 Studio Monitors
Behringer NEKKST K5 Studio Monitors
Presonus Temblor T10 Subwoofer
(2)audio-technica PRO 41 Dynamic Microphone
AKG D88S Dynamic Microphone
Audio-Technica AT2020 Condenser Microphone
SE Electronics SE 5000 tube condenser microphone
SE Electronics X1 S Studio Bundle
Shure SRH240A Studio Headphones
Studio One Artist, Logic Pro X, Adobe Audition CC 2018
Yosemite 10.10.2, Windows 10 Spring Creators Update (1803)
User avatar
by rnaqvi on Thu Mar 12, 2015 11:18 pm
It kind of depends on the sound you are looking for. The T10 definitely has a lower bass extension. If you do a lot of electronic music production you might like that better to reference really low end/subharmonic frequencies.

I have a pair of Ceres4.5's with a T8 in my house. The Ceres4.5's are basically the same as the Eris4.5 with the addition of BlueTooth. I really like the sound of this set up for the size room I have them in (a small bedroom).

Honestly, I don't think you'll be disappointed either way. Both of the subwoofers sound great. It just depends if you like that super low bass for the style of music you do.

Rick Naqvi
VP of Sales, PreSonus Audio Electronics
http://www.presonus.com
User avatar
by PreSonuSales2 on Fri Mar 13, 2015 8:14 am
I think Rick hit the nail on the head with this one! Either way, a Temblor sub is going to be an excellent addition to our 4.5 monitors (whether they be Eris or Ceres.) Something to keep in mind: you can dial the T10 back to match the level of the T8; but you won't be able to get a T8 to match the full volume of the T10. You also get a few more connection options with the T10. It just depends on if you want that extra boost on the end and the bypassing footswitch.

Inside Sales

*Please create a "signature" with your software and hardware specs to make it easier for us to help you... click HERE.

Home Setup: Studio 192 , Studio One Professional 3 (64 Bit), Eris E8s, Eris 4.5s, and Ceres 4.5s.
Office Setup: AudioBox 22VSL, Eris E5s, Studio One Professional 3 (64 Bit)
User avatar
by matthewgorman on Fri Mar 13, 2015 9:11 am
i have pretty much played bass most of my life. IMHO, I would never go below a 10" speaker for low end. Anything smaller just doesn't handle it the same way for me. In simple terms, you will never get a 10" speaker, and wish you had gotten an 8".

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by frankpacheco on Sat Mar 14, 2015 9:47 pm
Thank's everyone

Great feedback! T10's it is....

Audiobox iTwo USB Audio interface
Behringer U-PHORIA UMC404HD USB Audio Interface
Presonus Eris 4.5 Studio Monitors
Behringer NEKKST K5 Studio Monitors
Presonus Temblor T10 Subwoofer
(2)audio-technica PRO 41 Dynamic Microphone
AKG D88S Dynamic Microphone
Audio-Technica AT2020 Condenser Microphone
SE Electronics SE 5000 tube condenser microphone
SE Electronics X1 S Studio Bundle
Shure SRH240A Studio Headphones
Studio One Artist, Logic Pro X, Adobe Audition CC 2018
Yosemite 10.10.2, Windows 10 Spring Creators Update (1803)
User avatar
by PreSonuSales2 on Mon Mar 16, 2015 9:07 am
Awesome! Let us know once you get it!

Inside Sales

*Please create a "signature" with your software and hardware specs to make it easier for us to help you... click HERE.

Home Setup: Studio 192 , Studio One Professional 3 (64 Bit), Eris E8s, Eris 4.5s, and Ceres 4.5s.
Office Setup: AudioBox 22VSL, Eris E5s, Studio One Professional 3 (64 Bit)
User avatar
by tryggvenilsson on Sun Sep 18, 2016 9:11 am
Hi,
How can I connect Eris 4.5 to T8.
There is no sub connector on Eris 4.5
Kind regards
Tryggve Nilsson
User avatar
by matthewgorman on Mon Sep 19, 2016 9:05 am
Connect to the Sub first, then use the L/R outputs to connect to the Eris out of the sub. The crossover knob will determine what frequencies will pass through to the Eris.

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by chrisbasden on Tue Feb 28, 2017 8:52 am
On the note of that footswitch on the T10, does bypassing the subwoofer maintain the crossover point, or does it send full range signal to your main studio monitors?
User avatar
by matthewgorman on Tue Feb 28, 2017 10:47 am
The footswitch will bypass the crossover and send full signal to the attached speakers.

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5

10 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 2 guests