Discuss Monitor Station V2 and Monitor Station (Legacy)
Central Station and Central Station Plus
MicroStation BT
5 posts
Page 1 of 1
My remote isn't working, no lights, no sound.

Obviously I pushed the activate button, reset the CS and still nothing.
Using a generic S-VGA cable.

Any ideas?
User avatar
by matthewgorman on Mon Mar 28, 2016 6:55 pm
I want to confirm, but I am almost positive that the cable is proprietary. Let me check on this.

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by matthewgorman on Tue Mar 29, 2016 8:38 am
Cable is proprietary. There are specific voltage and resistance requirements for the remote that are not there in a standard vga cable.

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by taylorburg1 on Wed Mar 30, 2016 1:03 pm
Lame :(

Would that equate to no lights and sound at all, not just cause performance issues?
User avatar
by matthewgorman on Wed Mar 30, 2016 1:05 pm
Correct. There is power coming through the lines for the lights, and also the talkback condenser.

Cable is about $30 USD in the Presonus Store.

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5

5 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 6 guests