Discuss Sceptre S6 and S8 here
3 posts
Page 1 of 1
Hi all!

I've used my Sceptre6 for six month now with a sort of "temporary position" next to the desk in my home studio. Instead of this setup I'm now looking for monitor stands that ables me to get a better position for the monitors. I've came across two possible stands but before I go off and buy anything You guys might have better suggestions?

From K&M:
http://www.thomann.de/se/km_26740_monitorstativ.htm

From Millenium:
http://www.thomann.de/se/millenium_bs500_set.htm

A possible problem I see is that the plate to put the monitor on is smaller than the Sceptre6. I don't know how much of a problem that is though...

Any thoughts in this topic are welcome here! :)

Regards
David Fryxelius, Sweden
User avatar
by matthewgorman on Mon Mar 28, 2016 2:08 pm
I have a set of stands for my HS50's, and the plate is smaller than the speaker. I am not a big fan of it, but they seem to be stable enough for where they are.

For my sceptre's, I made my own stands for about $25 usd in wood. I originally made them for the S 8's, but my 6's are sitting on them now. Much sturdier. Very basic design. I made 2 platforms (per stand) to the dimensions of the S8's. Then used 2x4's on the 4 corners. The 2x4's are inside the perimeter, not screwed to the sides. 3/4" plywood for the platforms, finished up with some molding to spruce it up, and some foam to de-couple the speakers from the stands.

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by shanabit on Wed Mar 30, 2016 4:58 pm
I use these with my S6's with Auralex mo pads on them

http://www.sweetwater.com/store/detail/MonitorStd

StudioOnePro 6.1
UA Apollo Twin
OSX Sonoma 14.2

iMac 2013

3 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest