Our StudioLive 24.4.2Ai has totally lost its effects (A,B,C and D verb and delay). All routings sub1,2,3,4,and mains. Is this some permissions issue or is it a routing issue? We can see that the effects channels are being fed on the UC interface but there is no output. Lost them just before a festival! Anyone, anyone... The mixer has not been flashed in a long time so the firmware version is old but it matches computer software. Am going to update tomorrow... will that fix the issue?
Thanks in advance for any help. tom |
Sounds like a corrupt scene.
Did you try loading the Zero Out Scene and start from scratch to be sure it's not a hardware problem?
PC #1: Asus Prime Z690-P, i5-12600k 10-core (6+4), 32GB DDR4 3200 MHz, RTX 3060 12GB, ADATA XPG 512GB M.2 NVMe SSD, 2 x 1TB WD Black HDD
PC #2: ASUS X299 Prime Deluxe II, i7-7820X 8c/16t, 16GB 2666 MHz DDR4, GTX 1060 3GB, Samsung 970 EVO NVMe M.2 SSD (Win10 Pro), Samsung 860 EVO SATA SSD (Win11 Pro), OWC Aura 512GB NVMe M.2, 2 x 1TB HDD Mac: 2010 Mac Pro 6 core 3.33 GHz, 32GB 1333 MHz DDR3, AMD RX 5500 XT 8GB, Alpine Ridge Thunderbolt 3 Card, Aquantia 10Gbps AVB card, Dual eSATA PCIe + Stardom 8xHDD Raid Tower |
Users browsing this forum: No registered users and 8 guests