Hi there! I'm most commonly know in a few keyboard forums as Jeremykeys.
I'm currently living in Scarborough Ontario, Canada. I've got an older Studiolive 16.4.2 that I use as an interface to get to my music computer which is running Cubase Artist 7.5 for the moment. My wife and I just moved to this address so my upgrade to Cubase 9.5 Pro has to take a back seat to all of the expenses of moving.
I'm mostly a keyboard player but I also play guitar and bass and, well, I call it singing. Not sure if I want to know what other people call it.
One of these days I plan on getting around to using a lot more of the features in my mixer as opposed to using it just to get all of my various keyboards and things into my coputer. I really don't like repatching cables and what with all of my gear, I've got all of the inputs filled so far.
On thing I really want to figure out is exactly how to record my vocals by having them run first through the on board compressor. I'm sure there is a routing that I'm not doing. If anybody can offer me any advice I'd greatly appreciate it!
Thanks in advance.
jeremythornton wroteOn thing I really want to figure out is exactly how to record my vocals by having them run first through the on board compressor. I'm sure there is a routing that I'm not doing. If anybody can offer me any advice I'd greatly appreciate it!
On the Channel you do Vocal have the button Dig Out lit, then you get the EQ, Compressor and what have you printed on that track.
I found this in the manual:
The Fat Channel also gives you the option of sending just the unprocessed audio to your computer or including the Fat Channel settings in the recorded signal. When the Dig Out button is enabled, the signal being sent to the FireWire bus is post-EQ and post-dynamics processing; the button will illuminate to indicate this signal flow. When the button is disabled, the signal being sent to the FireWire bus is pre-Fat Channel. The Dig Out button is only available when one of the channel inputs is selected. The subgroups, main output, aux bus, aux inputs, and internal effects returns automatically send their signals post-Fat Channel dynamics and EQ. All FireWire sends are pre-fader except for the subgroups and the main outputs. For more information on using your StudioLive as an audio interface, please consult Section 2 in the StudioLive Software Library Manual.
Maybe that explain it better
Users browsing this forum: No registered users and 1 guest