Probably not but thought I'd ask. If it is, would the D8 channels be selectable in Studio One 3.5?
Last edited by RochesterDude on Fri Oct 06, 2017 7:30 am, edited 1 time in total.
The D8 is an ADAT interface.
It has to be plugged into another interface like a 192
or Quantum to work.
If you have one of the later they yes S1 can see it.
For HELP Read the Manual.
2) Create a SUPPORT TICKET. "Select Submit a Request".
3) For Comunity Help add your specs to your SIGNATURE AND.
Include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce
Detailed how to HERE.
My Website, Free Studio One Advance Training
SPECS:Win 10 64-bit, 12 Core i7: 32Gb DDR4 ram, 40" 4K monitor, StudioLive 24, Quantum, Faderport16, Central Station Plus, Sceptre 6,Temblor T10, Eris 4.5, HP60, Studio One Pro 4.0, Reaper 5.9, Sonar Platinum
Thanks for the reply. I mistyped in the subject, I meant is it compatable with Quantim. Yes I did mean to hook the D8 into the Quantum via ADAT. The documentation says the later version of the D8 was compatable but did not mention this hardware version.
Pretty much, adat is adat. The device you connect it to will display the available channels to whichever daw you use, so you should be fine.
Just to note, the Current DP88 uses the same mic pres as the Quantam. The difference is slight, but possible noticable.
Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor
StarTech EC13942 34mm Expresscard
S1Pro V2 , Melodyne Studio 4, Nomad Factory Studio Bundle, Waves , RM16, Studio 192, DP88, Faderport, Central Station Plus, Yamaha HS50 Monitors, Sceptre 6-8 Monitors, Temblor 10.
Users browsing this forum: No registered users and 1 guest