2 posts
Page 1 of 1
Hi.
Just purchased an A-SQ and I'm loving it!
I'm going through the manual.
Apparently I can setup the device's Autofill feature:

"As of Studio One 5.2, ATOM SQ supports Autofill. Open Studio One’s
External Device Editor and select ATOM SQ. Click the Autofill button
to have all pages of knob control filled in automatically."


I can't find the autofill button. I followed the instructions but don't see the button in the External Device Editor page.

Thanks for the help in advance
Rob
User avatar
by callumhenderson on Sun May 16, 2021 12:29 pm
On the external Devices page can you see the Atom SQ logo and the instrument name to the right after Focus?
Under this are eight knobs and below these on the bottom left should be the Auto-Fill button.

This is how I got to the External devices page:
1 open the instrument editor and select Atom SQ on the top right click on it. If ATOM SQ is not yellow click to bring the instrument in focus.
2 click on the tiny cog to the left of the ATOM SQ device and find the even tinier triangle to the left next to the Control box that should have opened up. select ATOM SQ from the drop down list.
3. The external devices page should appear if you’re lucky. It might have popped up under the main page.
4 as mentioned before the auto fill button should be on the bottom left. Click and it will turn yellow and the parameter names will appear under each knob.

Im not sure if there’s a more obvious way to find the External Devices editor.

2 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 6 guests