I have a new 24c. Using it for the first time. I'm recording acoustic guitar with two microphones i.e. recording in stereo. But they are mono in my ears. How do I send input 1 to my left ear and input 2 to my right. Can't believe there's no control for this on the device.
In fact what is with this Universal Control? I thought it would have an input mixer like pretty much every other audio interface I have ever used. I'd expect to control this stereo thing there. But no, it just seems to be a box where I can choose sample rate and block size, etc and pretty much nothing else. Am I missing something?
Universal Control provides the audio driver and firmware updates for PreSonus audio interfaces. You can change the following settings:
Studio One provides the mixer and is where you want to define your I/O. Once that's set, you'll want to add a stereo audio track with inputs set to your stereo inputs 1&2. Then just record/monitor enable the track so you can hear your stereo mics in your headphones.
Download the STUDIO ONE 5 PDF MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.
Windows 11 Pro 64-bit (21H2), Studio One 5.4 Pro | Notion 6.8.1 | Universal Control v184.108.40.206460
Dell Inspiron 17 5770 (Intel Core i7-8550U 1.8 GHz, 4GB AMD Radeon 530 Graphics, 16GB RAM, Samsung 860 EVO 2TB SSD
Series III 32 v2.5.17953, Revelator io24 v1.13
OK. This was what I didn't want to hear. So I have to go through Studio One's monitoring and the associated latency to hear my guitar in stereo?
The whole point of having a mix knob on the hardware is that you bypass your computer's latency for monitoring. The fact you can only do this in mono is a massive oversight by Presonus if you ask me. This limitation should have died out over a decade ago.
Thanks Trucky for confirming what I feared.
I have the same problem having a stereo signal from a mixer going into the IO back (1/2 inst/mic/line) and output to 2 active speakers and it's in mono. Wouldn't have to go through the DAW in order to have stereo. Using it (when not in the DAW) as normal sound device and the music coming from the PC is in stereo so why in h... is it not when coming from the line inputs?
Users browsing this forum: No registered users and 1 guest