7 posts
Page 1 of 1
Hi, I can't seem get ATOM to working properly. After entering Setup mode, it wouldn't go back to the default playable mode, and pad 1-8 light up yellow color. How to get back to "play" mode?

Here is the video:
https://streamable.com/ybmz5g

I have tried restarting, changing cables, using different ports, using hub and without hub, reinstalling/upgrading firmware to 3.4 (previously it's 3.4 though).

If I restart S1 and bring up impact, it can be played rightaway, but after pressing "Setup", I can't go back to "Play" mode no matter what button I pressed.

Thanks.
User avatar
by Bbd on Fri Oct 02, 2020 4:35 pm
Please contact Support about your issue.

Bbd

OS: Win 10 x64 Home, Studio One Pro 6.x, Notion 6, Series III 24, Studio 192, Haswell CPU: i7 4790k @ 4.4GHz, RAM: 32GB, Faderport 8/16, Central Station +, PreSonus Sceptre S6, Eris 3.5, Temblor 10, ATOM, ATOM SQ
User avatar
by jakeoleary1 on Thu Oct 29, 2020 6:29 pm
any resolution here? same exact issue.
User avatar
by Jemusic on Thu Oct 29, 2020 6:48 pm
What version of Studio One are both of you using? Also its Song Setup mode you are going into, not Setup mode.

Even so pressing Song Mode again should take you out of that mode. It does for me with ATOM working with bot 4.6.2 and V5.1 for me here.

Specs i5-2500K 3.5 Ghz-8 Gb RAM-Win 7 64 bit - ATI Radeon HD6900 Series - RME HDSP9632 - Midex 8 Midi interface - Faderport 2/8 - Atom Pad/Atom SQ - HP Laptop Win 10 - Studio 24c interface -iMac 2.5Ghz Core i5 - High Sierra 10.13.6 - Focusrite Clarett 2 Pre & Scarlett 18i20. Studio One V5.5 (Mac and V6.5 Win 10 laptop), Notion 6.8, Ableton Live 11 Suite, LaunchPad Pro
User avatar
by ChrisLand2 on Sat Nov 14, 2020 11:24 pm
Same here. Did you find the solution?

Edit: I think I fixed it. At the bottom of Studio One just above the transport section I had a note repeat function selected. I deselected it and the yellow buttons turned off.
User avatar
by redsprecacenere on Tue Oct 19, 2021 4:51 pm
ChrisLand2 wroteSame here. Did you find the solution?

Edit: I think I fixed it. At the bottom of Studio One just above the transport section I had a note repeat function selected. I deselected it and the yellow buttons turned off.


Great! That's the trick!
I was going mad with this.

Thanks!
User avatar
by Bbd on Wed Oct 20, 2021 7:54 am
Glad this got solved.

Bbd

OS: Win 10 x64 Home, Studio One Pro 6.x, Notion 6, Series III 24, Studio 192, Haswell CPU: i7 4790k @ 4.4GHz, RAM: 32GB, Faderport 8/16, Central Station +, PreSonus Sceptre S6, Eris 3.5, Temblor 10, ATOM, ATOM SQ

7 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 2 guests