5 posts
Page 1 of 1
My problem is simple. Im on "Channel" mode, I can freely select the first 11 tracks, everything works perfectly there. If I press next when on channel 11, nothing happens. If I select channel 12, the fader does not respond, and if I touch the fader, it will jump back to which ever fader the Faderport thinks its on (whichever was chosen last with the Faderport). I have updated the firmware, everything is set up according to the manual, it has been booted into Cubase mode, its setup as a device in Cubase, I checked the blinker fluid etc. etc. Nothing seems to let me get past channel 11.

Now I know, Mackie MCU is an 8 track protocol. So going past track 8 should load in the next bank of 8 tracks, which makes sense and is correct according to this post from Presonus:
https://support.presonus.com/hc/en-us/a ... Navigation
However, that is clearly not the case.

Anyone have a solution? Is this a problem introduced with Cubase 11? Will a fix be posted? Any ideas?

Thanks everyone, this is driving me insane
Ari

Cubase 11
Ryzen 1700X 8c/16t @4.00 GHz, 32 GB RAM, RTX 2700S
2 NVME drives, 3 SSD drives, 4 HDDs
Focusrite Clarett 4Pre USB,
Roland FA-08 Keyboard || Roland TD-12 Digital Drums
Presonus Faderport, Nektar Panorama P1, Arturia Keylab 61 Essential
User avatar
by klypeman on Sat Feb 13, 2021 5:58 pm
Are your shift button by any chance lit ?

Forum Moderator.
Please add your specs to your SIGNATURE.
Search the STUDIO ONE 5 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.


Windows 10 64bit Home, Mac Mini Big Sur, SO4.6.2 Pro, SO 5.2 Pro, LUNA, Cubase 10.5 Pro, SLIII32, 24.4.2, 16.0.2 FW, Quantum 2626, Faderport 8, Atom, Atom SQ, Console 1+Fader 1, UA Apollo Twin TB/USB, Toontrack, NI Komplete 12, ++
User avatar
by arianagonzalez1 on Sun Feb 14, 2021 10:34 pm
No, shift light definitely isnt lit

Cubase 11
Ryzen 1700X 8c/16t @4.00 GHz, 32 GB RAM, RTX 2700S
2 NVME drives, 3 SSD drives, 4 HDDs
Focusrite Clarett 4Pre USB,
Roland FA-08 Keyboard || Roland TD-12 Digital Drums
Presonus Faderport, Nektar Panorama P1, Arturia Keylab 61 Essential
User avatar
by klypeman on Thu Feb 18, 2021 7:40 pm
I will look up this in 10.5 Pro but have had problems getting past the first 8.
Am mostly on SO 5..

Forum Moderator.
Please add your specs to your SIGNATURE.
Search the STUDIO ONE 5 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.


Windows 10 64bit Home, Mac Mini Big Sur, SO4.6.2 Pro, SO 5.2 Pro, LUNA, Cubase 10.5 Pro, SLIII32, 24.4.2, 16.0.2 FW, Quantum 2626, Faderport 8, Atom, Atom SQ, Console 1+Fader 1, UA Apollo Twin TB/USB, Toontrack, NI Komplete 12, ++
User avatar
by klypeman on Fri Feb 19, 2021 7:09 am
I found out that if I press the Number under the channel I want to go to and Next on the FP2018 it switch to that channel all I had to do was to move the motorized fader on my FP2018.
Also I had to get rid of a second Mackie Control that I used on another controller but that's another story.
Hope it helps

Forum Moderator.
Please add your specs to your SIGNATURE.
Search the STUDIO ONE 5 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.


Windows 10 64bit Home, Mac Mini Big Sur, SO4.6.2 Pro, SO 5.2 Pro, LUNA, Cubase 10.5 Pro, SLIII32, 24.4.2, 16.0.2 FW, Quantum 2626, Faderport 8, Atom, Atom SQ, Console 1+Fader 1, UA Apollo Twin TB/USB, Toontrack, NI Komplete 12, ++

5 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest