Discuss Quantum Series Interfaces Here
|
Hi I just checked with my 2023 Mac with thunderbolt 4 and a quantum 2 and with a TB 2 to tb3 adapter and then directly into the port on the Mac it works perfectly. The adapter is an akitio t3t
|
juancolondecarvajal wroteHi I just checked with my 2023 Mac with thunderbolt 4 and a quantum 2 and with a TB 2 to tb3 adapter and then directly into the port on the Mac it works perfectly. The adapter is an akitio t3t Yes, I believe Apple's TB4 implementation still supports backwards compatibility. It was killed specifically on Intel's Maple Ridge (JHL8540) controller in a firmware update, which is the controller most commonly used for PC implementation of TB4. AFAIK, Apple use their own hardware solution that properly supports TB1 and TB2. It still puzzles me that whatever issues Intel were facing, that's how they chose to "solve" them. |
|
Don't know if it's any help but my 2626 always needs Device Manager refreshed before achieving sync.
I'm running Windows 10 on aIntel Core I9 10900x s2066, 64GB Corsair Vengeance LPX DDR4 3200 C16 Ram (4 x 16GB) Asus Prime X299-A II mobo, with GIGABYTE TITAN RIDGE rev2 Thunderbolt 3 PCIe CARD, and Starch 2m Active Thunderbolt 3 cable |
2pods wroteDon't know if it's any help but my 2626 always needs Device Manager refreshed before achieving sync. 2626 is thunderbolt 3 so nothing to do with problems with thunderbolt 2 devices
My system
Intel Core i9-10900K Processor Noctua NH-U12A CPU cooler Gigabyte Z490 VISION D Samsung 970 EVO Plus 1TB SSD Corsair Vengeance LPX DDR4 3200MHz 64GB MSI GeForce RTX 3080 Ti Gaming X Trio 12G StarTech Thunderbolt Cable 2M (TBOLTMM2MW) StarTech Thunderbolt 3 to Thunderbolt 2 adapter (TBT3TBTADAP) Neumann TLM 102 microphone Presonus Quantum Windows 10, Ableton 11, Cubase 10 |
|
Asus just released a TB rool back tool for Asus MB users
|
|
Ran the roll back FW tool. Verifed NVM31 was now loaded. 2632 was intermittant on connection, but did work. After some poking around on the web, landed on a UA fourm, and some said they had to disable Win10 support in bios for thunderbolt. After I did that, my Quantum 2632 now connects rock soild evertyime. I can even turn it off and on after window 11 loads and it connect instantly.
|
|
Quantum 2626 is now legacy (Thunderbolt 3).
Yey!
Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb. Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental). Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths. |
PreAl wroteQuantum 2626 is now legacy (Thunderbolt 3). Probably gonna work for many years even on thunderbolt 5. But it sucks....
My system
Intel Core i9-10900K Processor Noctua NH-U12A CPU cooler Gigabyte Z490 VISION D Samsung 970 EVO Plus 1TB SSD Corsair Vengeance LPX DDR4 3200MHz 64GB MSI GeForce RTX 3080 Ti Gaming X Trio 12G StarTech Thunderbolt Cable 2M (TBOLTMM2MW) StarTech Thunderbolt 3 to Thunderbolt 2 adapter (TBT3TBTADAP) Neumann TLM 102 microphone Presonus Quantum Windows 10, Ableton 11, Cubase 10 |
Who is online
Users browsing this forum: No registered users and 1 guest