Discuss Quantum Series Interfaces Here
1 post
Page 1 of 1
I've been seeing some odd behavior with the sample rate on my Quantum 2626. Before I file a bug report, I wanted to post here and see if anyone else has seen this.

First, some facts:
* I always run at 44.1kHz.
* I put my computer to sleep every day rather than logging out and shutting down.
* Normally, when I change sample rate in Universal Control, I hear faint digital noise for a couple seconds before the new sample rate is activated.

Here's the behavior I see:
* Wake the computer up.
* Play content from Spotify, YouTube, or Studio One.
- Expected behavior: It sounds normal.
- Actual behavior (sometimes): The content is too fast and pitched up, as if it's playing 44.1kHz content at 48kHz.

Here's my workaround:
* Open Universal Control and confirm it's set to 44.1kHz.
* Set sample rate to 48kHz. This happens instantly, with no faint digital noise like I describe above.
* Set sample rate back to 44.1kHz. This time, I hear the faint digital noise like normal during a sample rate change.
* After this, content from all apps plays normally.

It's as if the Quantum is resetting to 48kHz on wake (sometimes), but the drivers aren't aware of the change. Flipping the sample rate to 48kHz and back to 44.1kHz gets the drivers and the Quantum hardware back in sync. Anyone else seen this?

I'm running Universal Control 4.1.0.93124 and firmware 1.3-96.

Windows 11 Pro
64GB RAM, Intel Core i9 10850K
Gigabyte Z490 Vision D
2x Samsung 970 EVO Plus 2TB
Quantum 2626, 2m StarTech TB cable

1 post
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 8 guests