Can anyone tell me if the Quantum has Loopback?
|
marcrobertson wroteCan anyone tell me if the Quantum has Loopback? Not all interfaces do - some do but many don't - I think it will be possible to create your own loop back feature from an output (like windows soundcard) and use a third party loop back software. This may be free or not - Its something I'll look into when its needed - |
I was able to do Loopback via the SPIDF out going to my Antelope Pure 2 and then the SPIDF out from the Pure 2 back into the Quantum 2626 again.
It would be lovely to have it built-in, but it did work, and is still a digital signal. Obviously, you need a second device with SPIDF input and output to do this routing configuration. |
jason.lindgren wroteI was able to do Loopback via the SPIDF out going to my Antelope Pure 2 and then the SPIDF out from the Pure 2 back into the Quantum 2626 again. Hello Mr. Lindgren. Fancy seeing you here. LoopBack can be done with 3rd party Software as well. Or just send an output to one of your Inputs..
PC #1: Asus Prime Z690-P, i5-12600k 10-core (6+4), 32GB DDR4 3200 MHz, RTX 3060 12GB, ADATA XPG 512GB M.2 NVMe SSD, 2 x 1TB WD Black HDD
PC #2: ASUS X299 Prime Deluxe II, i7-7820X 8c/16t, 16GB 2666 MHz DDR4, GTX 1060 3GB, Samsung 970 EVO NVMe M.2 SSD (Win10 Pro), Samsung 860 EVO SATA SSD (Win11 Pro), OWC Aura 512GB NVMe M.2, 2 x 1TB HDD Mac: 2010 Mac Pro 6 core 3.33 GHz, 32GB 1333 MHz DDR3, AMD RX 5500 XT 8GB, Alpine Ridge Thunderbolt 3 Card, Aquantia 10Gbps AVB card, Dual eSATA PCIe + Stardom 8xHDD Raid Tower |
Soundflower is/was the go-to tool, when you're still on Mac. You can aggregate its 2x2-channel device with your Quantum interface to add loopback functionality.
|
I use this on Mac: https://github.com/ExistentialAudio/BlackHole
|
jason.lindgren wroteI was able to do Loopback via the SPIDF out going to my Antelope Pure 2 and then the SPIDF out from the Pure 2 back into the Quantum 2626 again. How would I go about doing this? You're sending your audio through the 2626 spdif ouput into another interfaces spdif input, them back into the spdif input of the 2626? I have a docking station that has a spdif output. I was trying to figure out whether I could just get a cable and send the audio out of the docking station, then feed it back into spdif input of the 2626. |
Users browsing this forum: No registered users and 7 guests