Hi all,
I used to have 2 stabeboxes connected in series to a StudioLive 32sc, and used that as my main interface. AVB was a lifesaver to keep the installation simple and clean. For various reasons I need to replace the mixer with a regular interface, and was hoping to stay in the Presonus world. However, none of the interfaces support AVB, so I have no way of connecting the stageboxes. I could get s Motu 828es interface, or use s 16r, but I’m not a fan of Motu, and the 16r is not really a good replacement for a full interface given its limited from panel controls etc. For the moment I’m learning towards getting a motu lp32 to convert the AVB streams to adat, and then connect those to the adat inputs of an interface, but I would have loved to be able to skip that step. If only the Quantum interface had an AVB port… Any other suggestions or ideas would be much appreciated. Thank you |
My question is why do you need to change from the mixer to an interface? Are you aware that there is now an "interface mode" for the series 3 mixers that gives direct output routing from the daw?
|
Only a Series 3 mixer can control the Preamps on an NSB. You either commit to that or change it out.
PC #1: Asus Prime Z690-P, i5-12600k 10-core (6+4), 32GB DDR4 3200 MHz, RTX 3060 12GB, ADATA XPG 512GB M.2 NVMe SSD, 2 x 1TB WD Black HDD
PC #2: ASUS X299 Prime Deluxe II, i7-7820X 8c/16t, 16GB 2666 MHz DDR4, GTX 1060 3GB, Samsung 970 EVO NVMe M.2 SSD (Win10 Pro), Samsung 860 EVO SATA SSD (Win11 Pro), OWC Aura 512GB NVMe M.2, 2 x 1TB HDD Mac: 2010 Mac Pro 6 core 3.33 GHz, 32GB 1333 MHz DDR3, AMD RX 5500 XT 8GB, Alpine Ridge Thunderbolt 3 Card, Aquantia 10Gbps AVB card, Dual eSATA PCIe + Stardom 8xHDD Raid Tower |
Users browsing this forum: No registered users and 2 guests