Discuss Studio 2|4 / 24c, 2|6 / 26c, 6|8 / 68c, 18|10 / 1810c, and 18|24 / 1824c USB 2.0 Interfaces Here
1 post
Page 1 of 1
I've tried a cheap DAC off Amazon that claims it converts LPCM and PCM signals from toslink or coaxial. I am using a 75 ohm RCA coax cable to connect from the S/PDIF output of the 1810 to this DAC and it does not work at all. The DAC specs include the settings I use in Pro Tools for post production work (44.1kHz, 48kHz, 96kHz, etc).

I use the 1810 with the UC mixer turned off and I use all 6 analog outputs to send separate signals to my speakers in my 5.1 surround sound mix room. I want to use the S/PDIF output as a stereo send to a headphone amplifier. I have created correct routing to the S/PDIF output in my Pro Tools I/O template and routed signal but it does not work.

What do I need to make it work?
Thank you
Danny

1 post
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 12 guests