Discuss Studio 2|4, 2|6, 6|8, 18|10, and 18|24 USB 2.0 Interfaces Here
2 posts
Page 1 of 1
So I had been suffering from digital noise from my pc leaking onto my studio monitors whenever I connected the usb cable. If I moved windows or loaded webpages or simply downloaded an update I would get a very low level but annoying digital noise.

I tried different cables, putting the monitors on different power outlets and even clip on ferrite beads on the usb cable or audio outputs

Finally found the ifi idefender3.0 usb ground loop breaker and bingo!!! No more crunchy noise

https://ifi-audio.com/products/idefender3-0/

I have a new Studiolive III 32 input board. I had the same issue on my older AI board but just lived with it.

I tried an 18ch capture this morning with the idefender in place and no problems at all. Playback from capture was flawless too

I guess my windows pc has a crappy noisy supply

I highly recommend the idefender. Only $49
User avatar
by michaelpeloso on Sat Feb 09, 2019 6:25 pm
Is this something I would put between my Studio 6/8 and my computer. I get these crazy ticks in my recording and would like to know if this might help.
Thanks,
Mike

Intel NUC mini PC kit NUC7i5BNH
7th Generation Intel Core i5-7260U; Socket : Soldered-down BGA
250GB PCIe NVMe - M.2 Internal SSD
PreSonus Studio 68 USB Audio Interface
8 Gig Ram
Windows 10 Home
Studio One Professional 4.5
Rode NT1-A

2 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest