5 posts
Page 1 of 1
|
My video recordings have an audio latency of about 9 frames? Is that normal? Are their configuration changes that can be made to the Studiolive 32SC to shorten this delay?
Thanks in advance! |
|
Hi and welcome to this forum
 A little latency is to be expected but 9 frames seems a lot, even without you mentioning the frame rate. In fact you didn't mention much at all for us to go on. So what does your rig look like, how is everything connected, how are you recording the audio and video, where are the mics wrt. the source... Adding specs and details will help to find a solution |
|
L+R audio into Newtek Tricaster TC1. Video source is NDI PTZ camera connected at 1080p 60. SDI sources at different resolutions have a similar latency. Is this the nature of the beast for digital mixers? I have not noticed this kind of delay with an analog mixer. Any way to shorten it?
|
|
9 frames at 60fps is a 150ms delay. The local routing latency (analog input to analog output) for Series III mixers is specified as 1.9ms. So something's not set correctly.
I suggest you do a full mixer reset (power up whilst holding the FX button) which will reset all user settings etc. to factory defaults. Then try again. |
|
Hold on. Where are you measuring this latency?
PC #1: Asus Prime Z690-P, i5-12600k 10-core (6+4), 32GB DDR4 3200 MHz, RTX 3060 12GB, ADATA XPG 512GB M.2 NVMe SSD, 2 x 1TB WD Black HDD
PC #2: ASUS X299 Prime Deluxe II, i7-7820X 8c/16t, 16GB 2666 MHz DDR4, GTX 1060 3GB, Samsung 970 EVO NVMe M.2 SSD (Win10 Pro), Samsung 860 EVO SATA SSD (Win11 Pro), OWC Aura 512GB NVMe M.2, 2 x 1TB HDD Mac: 2010 Mac Pro 6 core 3.33 GHz, 32GB 1333 MHz DDR3, AMD RX 5500 XT 8GB, Alpine Ridge Thunderbolt 3 Card, Aquantia 10Gbps AVB card, Dual eSATA PCIe + Stardom 8xHDD Raid Tower |
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 17 guests