4 posts
Page 1 of 1
Long time RM16AI owner that uses virtual sound check extensively with a FireWire equipped laptop. I just ordered a 24R and after reading the manual have some concerns. Please help me understand the following:

1. To record into my laptop (via USB) and use Capture, the manual says that the device is the “only” device that can be used as control. Does this mean when I play back a session thru FOH as a virtual sound check, I will not be able to use my IPAD to make mixer adjustments. Is only the laptop (onstage with rig) the only way to make adjustments to the session playing.

Or

By keeping the 24R hooked into my router via the Ethernet “control” jack still allow my IPAD connected on the same network to control the mixer while he Laptop with Capture is playing back a session

Thanks in advance - Justin

And yes, my wife says I always have control issues
Last edited by justindampier on Fri Jul 23, 2021 3:40 pm, edited 1 time in total.
User avatar
by PAE Seth on Fri Jul 23, 2021 3:10 pm
1. Where in the manual does it state that? and which manual document? That is not correct. I think there may be some context missing here.

2. Yes, you can use USB and Ethernet at the same time.

PC #1: Asus Prime Z690-P, i5-12600k 10-core (6+4), 32GB DDR4 3200 MHz, RTX 3060 12GB, ADATA XPG 512GB M.2 NVMe SSD, 2 x 1TB WD Black HDD

PC #2: ASUS X299 Prime Deluxe II, i7-7820X 8c/16t, 16GB 2666 MHz DDR4, GTX 1060 3GB, Samsung 970 EVO NVMe M.2 SSD (Win10 Pro), Samsung 860 EVO SATA SSD (Win11 Pro), OWC Aura 512GB NVMe M.2, 2 x 1TB HDD

Mac: 2010 Mac Pro 6 core 3.33 GHz, 32GB 1333 MHz DDR3, AMD RX 5500 XT 8GB, Alpine Ridge Thunderbolt 3 Card, Aquantia 10Gbps AVB card, Dual eSATA PCIe + Stardom 8xHDD Raid Tower
User avatar
by justindampier on Fri Jul 23, 2021 3:39 pm
That’s great to hear. Was worried!

StudioLiveTM Series III Rack Mixers Rackmount Digital and Remote I/O System with AVB Owner’s Manual

Page #6 (section 2.2.2)

Your StudioLive Series III rackmount mixer can be connected directly to UC Surface running on a computer using USB.

Please note: In this configuration, you can only use one device – your computer – to control your StudioLive mixer.
User avatar
by wahlerstudios on Sat Jul 24, 2021 4:42 pm
The drawing explains what the sentence says. When mixer and computer are connected via USB cable, a tablet can not "join" the network. It needs a router to connect remote devices.

Attachments
usb.jpg

4 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 18 guests