2 posts
Page 1 of 1
I recently got a second 16M and after updating its firmware I realized a dramatic difference in the loudness of both units. Jonny Doyle from PreSonus Support asked me to update both units and indeed, the new firmware 1.1.0.15533 adds something like +15 dB to all input and output channels. Incredible! This really makes the EarMixers much more usable. The sound has always been great, now there is more than enough "power" to handle the mixes.

Please, watch out your ears! They might get damaged next time you use an EarMix...

:thumbup:
User avatar
by PAE Seth on Thu Mar 21, 2019 10:02 am
It's +10 on the Input and Output.

Protip: Set each channel to Post-DSP, then all AVB sends will have Fat Channel processing applied to the EarMix streams, which can help increase volume (comp make-up gain, etc).

Also, take advantage of the built in limiter per channel on the EarMix, that can help maintain a solid level in the EarMix without having too many peaks hit the main out.

PC #1: Asus Prime Z690-P, i5-12600k 10-core (6+4), 32GB DDR4 3200 MHz, RTX 3060 12GB, ADATA XPG 512GB M.2 NVMe SSD, 2 x 1TB WD Black HDD

PC #2: ASUS X299 Prime Deluxe II, i7-7820X 8c/16t, 16GB 2666 MHz DDR4, GTX 1060 3GB, Samsung 970 EVO NVMe M.2 SSD (Win10 Pro), Samsung 860 EVO SATA SSD (Win11 Pro), OWC Aura 512GB NVMe M.2, 2 x 1TB HDD

Mac: 2010 Mac Pro 6 core 3.33 GHz, 32GB 1333 MHz DDR3, AMD RX 5500 XT 8GB, Alpine Ridge Thunderbolt 3 Card, Aquantia 10Gbps AVB card, Dual eSATA PCIe + Stardom 8xHDD Raid Tower

2 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 6 guests