2 posts
Page 1 of 1
Hi, im interested buying this mixer. Im wondering do i need a audio interface between the mixer and studio one 3? Or do i just hook up the mixer usb directly to computer? Is there latency when recording and monitoring over USB(computer) couse i like to jam over click track and lay down ideas over other instruments as they are playing with no latency.
User avatar
by matthewgorman on Mon Feb 12, 2018 1:00 pm
The mixer can also serve as the audio interface, but be advised, currently the only sample rate available is 48.0. 44.1 will be coming via a firmware update, no eta right now.

Latency is going to be affected by both the PC/Mac running the daw, and also the block size selected for the mixer driver. There have been some very good driver improvements for USB lately. I am currently getting around 5ms or a bit under, using the Series 3, which was about the same as I was getting with Firewire.

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5

2 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 13 guests