Page 1 of 1

touch sensitive

Posted: Mon Feb 17, 2020 3:36 pm
by villa1963
My FP8 faders are not touch sensitive. I am in Studio one 4 demo.
Any ideas? I have up to date firmware. I have tried adjusting the touch sensitivity via set up but to no effect.

Re: touch sensitive

Posted: Tue Feb 18, 2020 1:46 am
by bastiaanmarcscholtemeijer
With "adjusting touch sensitivity in the setup" you mean in the FaderPort Firmware right? By default this is set to 7 - does it work in any setting?

I recommend installing MIDI-OX from Its a small tool that allows you to see the MIDI data being sent to/from your MIDI devices. Just make sure you select the FaderPort device in Options / MIDI devices. Make sure you don't do this with S1 running, as only one program at a time can open the same MIDI port to a device.

With that done, and your FaderPort in "waiting for Studio One" state, gently touch a fader but do not move it.

When you put your finger on top and then release, you should see the following MIDI being sent from the FaderPort to your PC:

Untitled 6.jpg

If this is not the case I would contact Presonus support immediately, or just return the unit to the dealer where your purchased it from, and ask for a replacement.