FaderPort 8 and FaderPort 16 General Discussion
2 posts
Page 1 of 1
When I saw the new feature for UC 3 and firmware 3.10 called: Midi operation mode - I got excited :) finally some proper MIDI support for the FP8!

So..

I have installed the latest Universal Control (3.0.0.51747) and upgraded the firmware on my FP8 to 3.10, since I wanted to check out the new operations mode: Midi mode, and send midi cc data to Studio One.

Everything installed OK and I changed the FP8 mode from Studio One native to Midi Mode, and started S1.

When I have S1 open with a track that uses Presence, I can move fader 1 up and down, but I do not see the mod wheel on the virtual keyboard in Presence moving at all.

Midi monitor in S1 is showing "Controller Modulation [xy]" with xy being the CC value, but nothing happens. Presence is set to receive from "Faderport 8" (in the yellow box top right).

What am I doing wrong here?

:(

Studio One Professional 6.1.1 | 64bit Melodyne Assistant 5.2.0.006

Faderport 8 | Focusrite Scarlett 2i2 3rd gen
Studiologic SL88 Grand | Yamaha YDP-163 | Yamaha HS8 & HS8S | Austrian Audio Hi-X65 | Beyerdynamic DT770 PRO

Windows 10 x64 | AMD Ryzen 9 3900x | Asus X570PRO | 64GB G.Skill DDR4 3600MHz | 6TB NVME SSD
Confirmed to be a bug by Presonus support, and will be fixed in an update.

Studio One Professional 6.1.1 | 64bit Melodyne Assistant 5.2.0.006

Faderport 8 | Focusrite Scarlett 2i2 3rd gen
Studiologic SL88 Grand | Yamaha YDP-163 | Yamaha HS8 & HS8S | Austrian Audio Hi-X65 | Beyerdynamic DT770 PRO

Windows 10 x64 | AMD Ryzen 9 3900x | Asus X570PRO | 64GB G.Skill DDR4 3600MHz | 6TB NVME SSD

2 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 2 guests