FaderPort 8 and FaderPort 16 General Discussion
4 posts
Page 1 of 1
Select a channel/track with mouse and see it on fp8. Does this feature exist?? If yes what do i have to do in studio one for make this happen?

Studio One 5 Pro :punk:
Windows 10 Pro 64 bit V.1909
Intel i7 4790k
32GB RAM
Softube Console 1
PreSonus Faderport 8
RME FF400 Interface (Firewire Asio)
Ollo S4 headphones
User avatar
by Bbd on Thu Feb 08, 2018 11:01 pm
Yes, this works.
No special setup at all.
Does your UC recognize the FP8? Open UC and make sure you see it on the start page.
When you launch S1, at Options, do you see the FP8 under External Devices?
Do you have the FP8 set for both Send To and Receive From?

All of the above should automatically configure for you as long as UC can see your FP8.

Then, you click on any channel in S1 and it highlights the Select button for that channel on the FP8.

Make sure you have the latest UC firmware and the latest updates for S1.

Bbd

OS: Win 10 x64 Home, Studio One Pro 6.x, Notion 6, Series III 24, Studio 192, Haswell CPU: i7 4790k @ 4.4GHz, RAM: 32GB, Faderport 8/16, Central Station +, PreSonus Sceptre S6, Eris 3.5, Temblor 10, ATOM, ATOM SQ
User avatar
by TomTama on Fri Feb 09, 2018 6:52 am
There is one more piece to this that you need to understand. If you click on a channel in your DAW that is not in the bank of channels currently on the Faderport 8 the Faderport 8 will not automatically bank to that channel. To get the Faderport 8 to bank to the channel press down on the large encoder.

2013 Mac Pro 3 GHz 8-Core Intel Xeon E5, TB2, 64GB RAM, Catalina 10.15.7, Dell 43" 4K Monitor, Luna Display, 2X Apollo x8, Apollo x8p, UAD OCTO TB3 Satellite, UAD QUAD TB3 Satellite, UAD V9.14.5, UA OX 1.2, Studio One 5.4, Dangerous Dbox+, Dangerous 2-Bus LT, MiniDSP w/Dirac 2.0, Behringer PowerPlay P16-M & P16-I, ATOM, SSL UF8, Akai Advance 49, Focal Twin 6be, Focal Sub6
User avatar
by Lokeyfly on Sat Feb 10, 2018 10:22 am
TomTama wroteThere is one more piece to this that you need to understand. If you click on a channel in your DAW that is not in the bank of channels currently on the Faderport 8 the Faderport 8 will not automatically bank to that channel. To get the Faderport 8 to bank to the channel press down on the large encoder.


Exactly. I would love auto bank via mouse selection to be a feature (If selected). It would just open the banks up to be more serviceable, instantly, emulating a larger mix console.

It was my first, and only wish for the FP8.

Oh well.

S1-6.2.1, HP Omen 17" i7 10th Gen, 32 GB,512 GB TLC M.2 (SSD),1 TB SSD. Win10 Pro, Audient iD14 MkII, Roland JV90, NI S49 MkII, Atom SQ, FP 8, Roland GR-50 & Octapad. MOTU MIDI Express XT. HR824, Yamaha HS-7, NS-1000M, Yamaha Promix 01, Rane HC-6, etc.

New song "Our Time"
https://youtu.be/BqOZ4-0iY1w?si=_uwmgRBv3N4VwJlq

Visit my You Tube Channel
https://youtube.com/@jamesconraadtucker ... PA5dM01GF7

Latest song releases on Bandcamp -
 
Latest albums on iTunes

All works registered copyright ©️

4 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 3 guests