Got my new faderport 8 and the left 4 LCDs are not working ...(bummer!)
Only time they are working is when the presonus logo shows. When resetting the DAW option (startup with 2 left "select buttons" pushed they are blank and when working in DAW also. (Studio One) Anyone? |
First open a support ticket.
You can try running a calibration test with one of they'll menu options while in boot up configuration mode. This might tell you more.
My Website, Free Studio One Advance Training
SPECS: Win 11 23H2, 18 Core i9: 32Gb DDR4 ram, 42" 4K monitor, StudioLive 24/16, Faderport16, Central Station Plus, Sceptre 6, Sceptre 8, Temblor T10, Eris 4.5, HP60, Studio One Pro latest, Test Platforms Reaper latest, Cakewalk latest |
I just picked up a used Faderport 8 seems to have this same issue with the right 4 lcds/scribble strips. About 30% of the time they don’t come on when powering up, switching off then back on will eventually get them to come up. Did anyone above ever figure out what the issue was? Loose wire inside, firmware issue?
|
I just bought a new Presonus Faderport 16 the other day. Having the same issue with the first four LCD screens.
There are times when they do not work. After switching off and on about a couple of times, they start working again. Also, channel 9 does not show the correct name of the track after changing banks. It shows 0110101... (in Nuendo). Is it firmware or shoud I send it back for exchange? Thanks! |
Users browsing this forum: No registered users and 1 guest