Skip to content

Advanced search…

Lamp for CS18AI (polarity/soldering)

Discuss the new PreSonus CS18Ai
Forum rules
Post a reply
3 posts
Page 1 of 1
As PreSonus does not offer a gooseneck lamp for the CS18AI, I had to buy "something" and chose a product of Adam Hall. I could make it work after I got this information from the distributor in Germany:

Pin 3 = +12V
Pin 4 = Gnd (Minus)

Hope this helps.
Link to this post { REPLY }
User avatar
by philmoakes on Thu Mar 30, 2017 10:59 am
I bought a gooseneck lamp that was advertised as compatible from DV247 (I think). Works fine.
CS18, RM32, RM32, HP4, ERIS 5, MOTU AVB SWITCH
Link to this post { REPLY }
User avatar
by joshuawinn on Tue Aug 28, 2018 2:25 pm
We ended up going with the Littlite 18X-R4LED, which is about $70 at B&H. Its color temp is 4000K, so not too white. The right-angled XLR ships with its pins rotated the wrong way for the CS18AI, but they can be rotated pretty easily. HOSA also makes one that's cheaper if that's what you need.
Post a reply
3 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest