Hi,
Is it possible to control the volume for a set of 'B' monitors with S1 through the Studio 192, UC?
I have my main pair plugged into the main outputs on the 192, and the B's plugged into Line outs 1 and 2. I can switch between the two sets, but the volume control knob has no effect on the B pair while it works as it should with the A's. I've tried every combination of line outs ( I think ) with no success. I've found nothing in the user manual or in searching the forums. So far, my work-around is to select 'Dim', then select the B set in the speaker management area of the mixer, but the volume is still unusably loud.
I hope that I haven't overlooked something obvious and waste someones time.

Thanks;
Tom