StudioLive RM32Ai and RM16Ai Mixers & UC Surface with QMix Ai
5 posts
Page 1 of 1
|
I have seen others ask this question with no definitive answer from Presonus... The RM32 user manual does not include the pinout. The AI series 32 channel manual shows the pinout from the AI 32, but that does not tell us what the pinout is on the RM 32.. The AI32 uses the Tascam db25 std pinout. what does the RM 32 use?
|
|
All db25 on the presonus mixer series have the same pinout.
Studio One Pro v5, Notion 6, Nuendo 11, BitWig v3, Reaper v4, Ableton Live 8 Suite, iMac late 2015, Behringer Wing/x32-BigBoy/x32-rack all with Dante/aes67 and s16/sd16 stageboxes, Flow8, Waves x-wsg with SoundGrid server, Behringer X-Touch, X-Touch ONE, M-Air mr18, X-Air xr18, DP48, Hub4 and p16 monitor systems, TurboSound iQ-speakers, Motör 61, BCR-2000, FirePod 10, Apogee Ensemble, Alesis HD24, NI Komplete 12 Ultimate Collectors, Halion 6, True Temperament Frets on basses and guitars, Katana-100, DT-50, JSX, JCM800, Korg Kronos, Roland vk-7, Behringer Deepmind 12, Behringer Neutron
|
|
I am using the Hosa 800 series (DB25 to XLR) snake and it is wired correctly. I've attached the spec sheet for this product that diagrams the pinouts.
|
|
If all of the mixer series use the same pinout and if the Hosa 800 diagram works - then the Presonus units use the Tascam standard...
Thanks guys - big help |
|
Hey gang! Been using Studio192 but it has the DB25 Pin in/out. I am going to try to get that working so I can add more inputs. I see the Hosa product which I will order. I hope to be able to run the drum room harness to the to the DB25 input. But what Do I do with the outputs? Thanks!
Jerialice
|
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests