I have RM32ai working flawlessly with laptop/firewire.
...with universal control, capture, Studio One 3 etc. I picked up an old FirePod FP10 and would like to use it for recording some quick and dirty mobile tracks. I DO NOT want to screw current setup with potential driver conflicts! Any known issues or advice? I also have a classic 24.4.2, which had compatibility issues with RM32. which is why I'm asking. viewtopic.php?f=222&t=8021 never heard if this was resolved. Thanks Bob |
The incompatibilty problem of the Studio Live mixers has been solved ages ago, both UC versions can run on one computer - but not simultaneously. You can use either the legacy UC (SL 24.4.2) or the present UC (RM32AI). If FireWire is important for your workflow, go for UC 1.8 or UC 1.8.3 because of the "FireWire lag" of UC 2.x, which makes the signal of UC unusable. It is possible to run UC 1.8.x on your computer and UC 2.5.x on a tablet parallel, because they share the same firmware version.
You can find all information and files on the download pages: https://www.presonus.com/products/StudioLive-24.4.2/downloads Universal Control v1.7.6 https://www.presonus.com/products/StudioLive-RM32AI/downloads Universal Control 2.5.2 | (with FireWire) Universal Control 1.8.3.40882 https://www.presonus.com/products/FP10/downloads FP10 Installer v5.13 for Windows 7 or MacOS X 10.7.5 |
Thanks Wahlerstudio,
To be safe I installed the firepod on older laptop for now. (more versatile anyway) Loaded studio one artist on laptop to test. I recorded simple vocal test track into studio one and playback was fine. When in imported a track previously recorded in capture with RM32AI (48 kHz 24 bit) the track plays really slow (sounds like almost half speed). The FP10) control panel is set for 48 kHz and the song setup in Studio One is 48 kHz. ??? Not sure what I'm missing. If I switch audio device in studio one to windows audio, it plays through laptop speakers at correct speed. Thanks Bob |
Upon further testing, speed is slow. After setting "speedup to about 1.5 the speed sounds close, but there is still a
static like distortion on the playback. when I switch audio device to windows audio, playback is perfect. |
Users browsing this forum: No registered users and 4 guests