StudioLive RM32Ai and RM16Ai Mixers & UC Surface with QMix Ai
|
Hey WahlerStudios, Are you still seeing a lag over Firewire with the beta Firmware and newest UC 2x? My biggest issue with it is the ghosting faders and pots, the meters are not as much of a concern. . . I have one more gig tonight then I'm free till May 17th so I'm going to try to test it ASAP after today.
Steve
StudioLive RM32AI
Rackmount Windows 8.1 PC Quad core 8G ram ASUS RT-N66U Dual Band Router IPad2, IPad Air 2, Studio One 3 Pro, 1 DBX Driverack 260 2 QSC KW 153's, 2 Turbosound TMS-1's 2 OHM MR450D Subs with Kilomax 18inch drivers 4 EV ZLX-12P's, 1 TurboSound iX15, 2 Yamaha S115V's 1 Crest Pro-Lite 7.5 (7500 watts) amp, 2 Behringer EP4000 amps 10 58/57 mics, 1 SM86, 1 sE8, 1 sE2200, 1 AT2020, 2 AT2021 1 beta52 kick mic, 2 e609, 2 Radial J48 DI's, 1 PRO48 DI 2 4Bar lights, 1 4Play, 1 6Spot, 1 fog machine |
|
Yes and no...
 There is obviously a problem with older Capture recordings. I write more about it in the beta forum. Otherwise and especially if you are not depending on the meters (what you see is not what you get), everything looks quite fine, I would say.Hardy |
|
"Locked" just means you can't post to it, you can still read it.
Karyn
------------------------------------------------------- SL32ai, RM32ai, SL328AI x2, SL18sAI x2, all Dante. Studio 192, Digimax FS, Faderport, Sonar Platinum, Studio One. http://refer.waves.com/dzDVn Dante Level2 certified. |
|
Nope, I’m getting a “you are not authorized” message if I try to read that forum.
Even if I might use these mixers on occation I don’t own one and therefor have none registered on me and is therefor prohibited to read that part of the forum. Karyn wrote"Locked" just means you can't post to it, you can still read it.
Studio One Pro v5, Notion 6, Nuendo 11, BitWig v3, Reaper v4, Ableton Live 8 Suite, iMac late 2015, Behringer Wing/x32-BigBoy/x32-rack all with Dante/aes67 and s16/sd16 stageboxes, Flow8, Waves x-wsg with SoundGrid server, Behringer X-Touch, X-Touch ONE, M-Air mr18, X-Air xr18, DP48, Hub4 and p16 monitor systems, TurboSound iQ-speakers, Motör 61, BCR-2000, FirePod 10, Apogee Ensemble, Alesis HD24, NI Komplete 12 Ultimate Collectors, Halion 6, True Temperament Frets on basses and guitars, Katana-100, DT-50, JSX, JCM800, Korg Kronos, Roland vk-7, Behringer Deepmind 12, Behringer Neutron
|
|
Ah, sorry. I assumed that as you're in the RM forum that you had an RM...
Yes, you're right. The beta sections are "private".
Karyn
------------------------------------------------------- SL32ai, RM32ai, SL328AI x2, SL18sAI x2, all Dante. Studio 192, Digimax FS, Faderport, Sonar Platinum, Studio One. http://refer.waves.com/dzDVn Dante Level2 certified. |
|
Logged in. RM Mixer registered on my profile. Still get message to say 'Forum Locked' or 'You're not authorised'. Any ideas please?
|
|
I'm definitely logged in and following the link takes me to 'you are not authorised to view this page'.
|
|
The problem I have is that until the FireWire lag is fixed, I can’t really update uc surface on my Mac mini. So having any new features delivered for my RM (remote RTA) still doesn’t help me. I am a bit disappointed that it has taken this long and it still isn’t fixed.
|
|
The term should be changed from FireWire lag to FireWire display lag, because that's what it was and still is, even with the beta firmware. FireWire (audio) works fine, but do not look at any metering display in UC Surface... It is now clear that the problem has come with UC Surface 2.0. The metering of Studio One, connected via FireWire, shows everything "in time".
I don't think you will miss so much by staying with UC 1.8 on your computer, because the firmware on the mixer is more important. It may well be that "good ol' 1.8" shows and does everything, when the firmware of your mixer is updated. "Sync Select" probably works, because it was already a feature of UC 1.8. There is no "remote RTA". It's just the "go remote" function, which is the noisy part of Smaart. This feature is now available on UC Surface tablet, which of course needs Smaart on a computer. I have no idea if a combination UC 1.8 (computer) and 2.7 (tablet) can handle "go remote". Generally, there is no problem using both versions. You can use the new features, but the display on your computer is still "readable". Why not check the beta firmware for your mixer and UC 2.7 on your iPad (if your iPad is young enough)? |
|
and stating that the display lag issue for meters continues on UC 3.X
|
Who is online
Users browsing this forum: No registered users and 39 guests