StudioLive RM32Ai and RM16Ai Mixers & UC Surface with QMix Ai
6 posts
Page 1 of 1
|
The Capture remote (imbedded in iOS UC Surface) will stop communicating with my MB Pro firewired to the RM32ai. No problem before, and I obviously can't roll back. Have the latest versions of everything on both iPad and laptop.... The mixer keeps communicating.
|
|
do you have UC version 2.0.1? seems not to be the best version ever, a major update with a lot of improvements is announced for end of april
SL1602
RM16AI Nowsonic stage router StudioOne pro2 mac book pro 2009 ipad4 db technologies DVX 10(2x), DVX8(4x) db technologies S08(2x) https://www.waves.com/r/bqvxon |
|
This is what I posted on the FB forum: The Capture remote component of iOS UC Surface loses communication with Capture in the laptop. My workaround is to start recording at the laptop and then reload UC Surface on the iPad. It's a pain...I've got mission critical gigs coming up in June. It must be addressed!
|
Friedhelm wrotedo you have UC version 2.0.1? seems not to be the best version ever, a major update with a lot of improvements is announced for end of april Yes...the latest version... |
|
great video.
Hope you will be more happy soon! 
Lenovo 29" A2 I7 touch, Studio One 2 Pro, X3e, Xa, Sonar 4-8, Win 8 64 bit, DAW: Intel Core i7 4960X@ 3.60GHz, ASROCK EXTREME mottherboard, 48GB DDR3 1600MHz, Nvidea NVS 510, 488GB SSD, 300GB SSD, 12TB in SATA Hardware: VS-700 set, Presonus RM32AI, Studio Live 24.4.4. & 16.0.2, Central Station, RME Fireface 800, Matrox MX02 Rack, Roland Integra 7, Roland A-88, Edirol R-4 Pro, Focusrite Liquid Channel x 2, Jomeek Studio Channel VC1Qcs, Ultra Dyne 9024, loads of analogue stuff. Roland TD30KV, Komplete 9 Ultimate, Monitors: JBL Studio Monitor 4412, SE Monroe Egg 150, M-Audio CX5,
|
6 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 10 guests