StudioLive RM32Ai and RM16Ai Mixers & UC Surface with QMix Ai
22 postsPage 2 of 2
1, 2
Yes exactly. If I only use rm16 and cs 18 everything works, but when I connect it to Studio One, I can't hear anything even though the leds of the cs18 show me that the sound is coming. :?
User avatar
by wahlerstudios on Mon Nov 14, 2022 6:03 am
You should separate recording from playing tracks. If you have signals coming to the mixer, Firewire will send to signals directly to Studio One. All you need is the correct "song template". After recording, Studio One will play the tracks back to their original mixer channels (track 1 -> channel 1, track 2 -> channel 2...) and all you need to do is to change input source of the channels from analog to digital. I don't remember precisely which buttons had to be activated, but I think you will find this out. What the CS18Ai shows is not always relevant. It shows the network signals, not the USB signals.

The rack mixers also have a digital stereo return, so you can send the mix bus of Studio One directly to the rack mixer.

22 postsPage 2 of 2
1, 2

Who is online

Users browsing this forum: No registered users and 25 guests