3 posts
Page 1 of 1
|
I want to use 3.5mm mics (headset or lavalier) using TRS (6.3mm) adapters, but AudioBox don't send/receive any signal, no matter how loud I scream at the mics.
Examples:   I have increased the gain knobs of both inputs, I have move the Mix knob, and I have activated/deactivated the blue-led buttons (except for the 48V phantom button of course) but none of that make it work. I have tested if my interface is working connecting a electric piano I have and it does work with that so the interface is working fine on both inputs, but when it comes ti these 3.5mm mics it just doesn't work. I have checked the use manual but it doesn't say anything about these, from what I understood is that it should work since the AudioBox has its own amplifiers for both input channels. I would love any help, thanks in advance! 
Last edited by avith117 on Fri Mar 08, 2024 9:50 pm, edited 1 time in total.
|
|
Those are probably electret mics needing a form of power from the input different from phantom power. You need an electret mic adapter which converts phantom power and also properly connects to the 2-ring plug.
|
SwitchBack wroteThose are probably electret mics needing a form of power from the input different from phantom power. You need an electret mic adapter which converts phantom power and also properly connects to the 2-ring plug. I see now. I will see if I can find them around my city. Thank you for the reply! |
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest