Discuss Live Sound Situations here. Product Specific questions or posts may be moved to product centric subforums.
2 posts
Page 1 of 1
|
Looking for a good Megaphone effect using FX/FAT settings for vocal Mic.
I've try some stuff but not good results. Sample MP3 is what I'm looing for (used TC-Helicon "V") Thanks for any suggestions (Need good detail)
|
|
Use channel PEQ.
Set the High and Low bands to shelf, not peak, then use them as a band pass filter. Drop the gain on both to -6 or higher, then raise / lower the frequency on each until the signal sounds like an old speaker, or megaphone. The idea is that you're shaping the EQ to mimic a horn style PA speaker that can only reproduce a limited frequency range (200 - 2k hz, etc). Some compression may help as well, try the auto setting and just lower the threshold until you get around 3-6 dB (or adjust to taste).
PC #1: Asus Prime Z690-P, i5-12600k 10-core (6+4), 32GB DDR4 3200 MHz, RTX 3060 12GB, ADATA XPG 512GB M.2 NVMe SSD, 2 x 1TB WD Black HDD
PC #2: ASUS X299 Prime Deluxe II, i7-7820X 8c/16t, 16GB 2666 MHz DDR4, GTX 1060 3GB, Samsung 970 EVO NVMe M.2 SSD (Win10 Pro), Samsung 860 EVO SATA SSD (Win11 Pro), OWC Aura 512GB NVMe M.2, 2 x 1TB HDD Mac: 2010 Mac Pro 6 core 3.33 GHz, 32GB 1333 MHz DDR3, AMD RX 5500 XT 8GB, Alpine Ridge Thunderbolt 3 Card, Aquantia 10Gbps AVB card, Dual eSATA PCIe + Stardom 8xHDD Raid Tower |
2 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 5 guests