Discuss using Dante, Audinate Software and Dante enabled consoles, etc.
33 postsPage 2 of 2
1, 2
As a bit of a follow-up, I live in the Middle East and contacted a PreSonus dealer here and asked about the Dante cards and a few other items related to the RM/AI series. Here was his reply:

"Regarding the DANTE Card, I think it’s discontinued but I will check"

On several other items I received the same message back from him, even the ipad holders for AI...

Can anyone here confirm this?

If true then I would assume that RM/AI are nearing the end of service. It would be very nice if PreSonus decided to give all RM/AI owners Dante cards at a reduced cost --- although those of you who already bought them would not benefit.. : (

Also is there a particular Dante card I should look for? Were there multiple versions or do they all have the Brooklyn II chip or not?

StudioLive AVB 16_32_48 AI Mix System

CS18AI | RM32AI | RM16AI | SW5E Switch
Huawei WS322 5Ghz Router | Static Manual IPs
3x iPad | Mac mini | Apple FW to Thunderbolt Adapter
Mac OSX 10.13.5 High Sierra

Previously owned: SL 16.4.2 | 1818VSL
User avatar
by roblof on Mon Jun 18, 2018 6:03 am
A manufacturer, like presonus, buys a special card/chipset (in most cases the brooklyn 2) from audinate then they have to build their own electronics around it to fit its purpose.

So, there exist only one card for your mixer and it comes directly from presonus.

Studio One Pro v5, Notion 6, Nuendo 11, BitWig v3, Reaper v4, Ableton Live 8 Suite, iMac late 2015, Behringer Wing/x32-BigBoy/x32-rack all with Dante/aes67 and s16/sd16 stageboxes, Flow8, Waves x-wsg with SoundGrid server, Behringer X-Touch, X-Touch ONE, M-Air mr18, X-Air xr18, DP48, Hub4 and p16 monitor systems, TurboSound iQ-speakers, Motör 61, BCR-2000, FirePod 10, Apogee Ensemble, Alesis HD24, NI Komplete 12 Ultimate Collectors, Halion 6, True Temperament Frets on basses and guitars, Katana-100, DT-50, JSX, JCM800, Korg Kronos, Roland vk-7, Behringer Deepmind 12, Behringer Neutron
User avatar
by wahlerstudios on Mon Jun 18, 2018 6:09 am
"Cards at a reduced cost" - good idea! ;-) Ray Tantzen wrote about this theme on March 15, 2017: "We're also planning to offer some promotions on Dante option cards for those who can address their needs by going that route. I'm trying to finalize those deals now so we can roll them out ASAP. Once they are rolled out, registered users will get an email about it and I'll also post it here."

I suppose the manufacturing of AI products and assessoires has stopped some months already. On Sept. 27, 2017 Ray Tantzen wrote: "AVB networking on the AI platform will continue to work as a solution for connecting an AI console with an RM/RML rack mixer as a stage box, as well as cascading two RM/RML mixers to create a 64-channel system." The decision about the future of the AI family was made somewhere between March and September and yes, the AI products definitely "will continue to work" for the next 10 years or so. But this doesn't mean that sales continue. Already now it is nearly impossible to buy RM/RML rack mixers and CS controllers in Germany, where I am living, but both option cards (Presonus SL-Dante-Mix 549,- Euro, Presonus SL-AVB-Mix 319,- Euro) are widely available. And when the shops run out of stock, the importer can deliver them for some time. They surely will sell the last part they have on stock - with pleasure...! Then and only then is the time to think about using a term like "discontinued", I suppose.

IMHO 549,- Euro for a Dante card does not at all sound like "promotion".
User avatar
by gothink1 on Tue Jun 19, 2018 6:50 am
roblof wroteA manufacturer, like presonus, buys a special card/chipset (in most cases the brooklyn 2) from audinate then they have to build their own electronics around it to fit its purpose.

So, there exist only one card for your mixer and it comes directly from presonus.


Thank you for your reply.

The reason I ask this is that during my research looking for the Dante card I found what appears to be two different cards.

If you do a quick search on Ebay (https://www.ebay.com/sch/i.html?_from=R ... e&_sacat=0) or Reverb (https://reverb.com/marketplace?query=presonus%20dante) ---or even some of the retail sites... you can find cards that have images which are quite different form each other. One has a green board and the other has a red board.

Due to the current situation with PreSonus' "3rd Party AVB" problem -- I would like to make sure I get the last version of the Dante card that would be least likely to have issues for the future.

Maybe they are all the same, maybe someone knows here... maybe the pics are wrong. Just would like to be sure : )

StudioLive AVB 16_32_48 AI Mix System

CS18AI | RM32AI | RM16AI | SW5E Switch
Huawei WS322 5Ghz Router | Static Manual IPs
3x iPad | Mac mini | Apple FW to Thunderbolt Adapter
Mac OSX 10.13.5 High Sierra

Previously owned: SL 16.4.2 | 1818VSL
User avatar
by Karyn on Tue Jun 19, 2018 7:13 am
There are indeed two Presonus Dante cards. One fits the mixers and one fits the AI series speakers. All my Presonus kit has them (mixers and speakers) they work well.

Karyn

-------------------------------------------------------
SL32ai, RM32ai, SL328AI x2, SL18sAI x2, all Dante.
Studio 192, Digimax FS, Faderport,
Sonar Platinum, Studio One.
http://refer.waves.com/dzDVn
Dante Level2 certified.
User avatar
by roblof on Tue Jun 19, 2018 8:19 am
Checking the credible sources there seems to exist a red dante card and a green dante card for the mixers. Presonus own shop shows the red one.

I have no idea of what the difference is but looking at the pictures they look quite different on the surface with components not in the same places. I'd try to get the latest one since they obviously spent a good deal on redesigning the card...

My guess is that the green one is the more recent one since the first announcement for the dante card showed a red one. But as I said, that is just a guess.

gothink1 wrote
roblof wroteThe reason I ask this is that during my research looking for the Dante card I found what appears to be two different cards.

If you do a quick search on Ebay (https://www.ebay.com/sch/i.html?_from=R ... e&_sacat=0) or Reverb (https://reverb.com/marketplace?query=presonus%20dante) ---or even some of the retail sites... you can find cards that have images which are quite different form each other. One has a green board and the other has a red board.

Studio One Pro v5, Notion 6, Nuendo 11, BitWig v3, Reaper v4, Ableton Live 8 Suite, iMac late 2015, Behringer Wing/x32-BigBoy/x32-rack all with Dante/aes67 and s16/sd16 stageboxes, Flow8, Waves x-wsg with SoundGrid server, Behringer X-Touch, X-Touch ONE, M-Air mr18, X-Air xr18, DP48, Hub4 and p16 monitor systems, TurboSound iQ-speakers, Motör 61, BCR-2000, FirePod 10, Apogee Ensemble, Alesis HD24, NI Komplete 12 Ultimate Collectors, Halion 6, True Temperament Frets on basses and guitars, Katana-100, DT-50, JSX, JCM800, Korg Kronos, Roland vk-7, Behringer Deepmind 12, Behringer Neutron
User avatar
by gothink1 on Tue Jun 19, 2018 11:11 am
I will send off a support ticket and report back the answer. : )

Thanks for your help

StudioLive AVB 16_32_48 AI Mix System

CS18AI | RM32AI | RM16AI | SW5E Switch
Huawei WS322 5Ghz Router | Static Manual IPs
3x iPad | Mac mini | Apple FW to Thunderbolt Adapter
Mac OSX 10.13.5 High Sierra

Previously owned: SL 16.4.2 | 1818VSL
User avatar
by wahlerstudios on Tue Jun 19, 2018 11:29 am
Why not read what is written…?

The SL-Dante-MIX Option Card (for AI mixers)
https://shop.presonus.com/products/accessories/Mixer-Accessories/SL-Dante-MIX

The SL-AVB-Mix Option card (for Ai mixers)
https://shop.presonus.com/products/accessories/Mixer-Accessories/SL-AVB-Mix-Option-card

The SL-Dante-SPK option card (for StudioLive AI loudspeakers only)
https://shop.presonus.com/products/accessories/Loudpeaker-Accessories/SL-Dante-SPK-option-card

Karyn is always right!

;-)
User avatar
by roblof on Tue Jun 19, 2018 12:11 pm
Green Dante card:
https://www.thomann.de/se/presonus_sl_dante_mix.htm

Red Dante card:
https://www.bax-shop.se/expansionskort- ... aQQAvD_BwE

Both are listed as for StudioLive rm/ai mixers and the pictures seems to verify this... Presonus own shop only shows the red one.

Hence the confusion...

wahlerstudios wroteWhy not read what is written…?

The SL-Dante-MIX Option Card (for AI mixers)
https://shop.presonus.com/products/accessories/Mixer-Accessories/SL-Dante-MIX

The SL-AVB-Mix Option card (for Ai mixers)
https://shop.presonus.com/products/accessories/Mixer-Accessories/SL-AVB-Mix-Option-card

The SL-Dante-SPK option card (for StudioLive AI loudspeakers only)
https://shop.presonus.com/products/accessories/Loudpeaker-Accessories/SL-Dante-SPK-option-card

Karyn is always right!

;-)

Studio One Pro v5, Notion 6, Nuendo 11, BitWig v3, Reaper v4, Ableton Live 8 Suite, iMac late 2015, Behringer Wing/x32-BigBoy/x32-rack all with Dante/aes67 and s16/sd16 stageboxes, Flow8, Waves x-wsg with SoundGrid server, Behringer X-Touch, X-Touch ONE, M-Air mr18, X-Air xr18, DP48, Hub4 and p16 monitor systems, TurboSound iQ-speakers, Motör 61, BCR-2000, FirePod 10, Apogee Ensemble, Alesis HD24, NI Komplete 12 Ultimate Collectors, Halion 6, True Temperament Frets on basses and guitars, Katana-100, DT-50, JSX, JCM800, Korg Kronos, Roland vk-7, Behringer Deepmind 12, Behringer Neutron
User avatar
by gothink1 on Tue Jun 19, 2018 10:37 pm
gothink1 wroteI will send off a support ticket and report back the answer. : )

Thanks for your help


I received an answer from support about the fact that there are 'different looking' cards for the same purpose (RM/AI)

"There is no difference in the two cards in terms of function and part number. Some photos were taken and used when the product wasn't fully released and things like green versus red PCB boards are just variances in manufacturer builds. The red would be the latest in terms of "build". For future reference, whenever you have a question about one of our products looking different in several photos, always go with our website as it will have the latest. "

StudioLive AVB 16_32_48 AI Mix System

CS18AI | RM32AI | RM16AI | SW5E Switch
Huawei WS322 5Ghz Router | Static Manual IPs
3x iPad | Mac mini | Apple FW to Thunderbolt Adapter
Mac OSX 10.13.5 High Sierra

Previously owned: SL 16.4.2 | 1818VSL
User avatar
by Karyn on Thu Jun 21, 2018 6:19 am
Karyn is not always right.



Yeah, I know it sound unbelievable... ;)

Karyn

-------------------------------------------------------
SL32ai, RM32ai, SL328AI x2, SL18sAI x2, all Dante.
Studio 192, Digimax FS, Faderport,
Sonar Platinum, Studio One.
http://refer.waves.com/dzDVn
Dante Level2 certified.
User avatar
by matthewseymour on Wed Sep 05, 2018 8:35 am
Pointless bump.... Any chance of a version 4 firmware update Presonus?
User avatar
by colinbart on Tue Sep 11, 2018 9:18 am
I agree, Audinate has continued to improve Dante, and those of us that made the decision to use Presonus products are being left behind! AES67 support would be amazing, and could potentially allow for RM series to be semi-compatible with Series III consoles! Likewise, AES67 support on the Series III side could potentially allow Dante Virtual Soundcard to record over network on windows based PC's.

33 postsPage 2 of 2
1, 2

Who is online

Users browsing this forum: No registered users and 4 guests