Capture 1.x and Capture 2.x
3 posts
Page 1 of 1
Hello,

I'm using the Startech adapter (Thunderbolt 3 to Thunderbolt 2) AND THEN GOING INTO the Apple adapter (Thunderbolt 2 to Firewire 800)... AND THEN firewire 800 cable into our 32.4.2ai mixer.

Universal Control appears to work just fine. Capture does not recognize the firewire device. Has anyone had any luck with this type of setup? I've dropped hundreds by now into adapters and still can't get it to work. PLEASE, anyone out there with advice?

Thanks for your time,
Ronny Young
User avatar
by sjc193 on Mon Jul 17, 2017 6:50 am
I have seen other people have success with the two adapters. Have you tried the OHCI Test in the File menu of the UC Surface yet?

Steve

StudioLive RM32AI
Rackmount Windows 8.1 PC Quad core 8G ram
ASUS RT-N66U Dual Band Router
IPad2, IPad Air 2, Studio One 3 Pro, 1 DBX Driverack 260
2 QSC KW 153's, 2 Turbosound TMS-1's
2 OHM MR450D Subs with Kilomax 18inch drivers
4 EV ZLX-12P's, 1 TurboSound iX15, 2 Yamaha S115V's
1 Crest Pro-Lite 7.5 (7500 watts) amp, 2 Behringer EP4000 amps
10 58/57 mics, 1 SM86, 1 sE8, 1 sE2200, 1 AT2020, 2 AT2021
1 beta52 kick mic, 2 e609, 2 Radial J48 DI's, 1 PRO48 DI
2 4Bar lights, 1 4Play, 1 6Spot, 1 fog machine
User avatar
by ronnyyoung on Mon Jul 17, 2017 7:30 am
@sjc193 I have not, but will do it today! Thanks :)

A small update from yesterday... The computer recognises the StarTech adapter but says something was wrong with the Apple adapter. I’ll have to recreate the issue to get the exact error message again, but I’m thinking it’s the Apple adapter messing things up.

3 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest